The accumulation of plastic wastes in different environments has become a topic of major concern over the past decades; therefore, technologies and strategies aimed at mitigating the environmental impacts of petroleum products have gained worldwide relevance. In this scenario, the production of bioplastics mainly from polysaccharides such as starch is a growing strategy and a field of intense research. The use of plasticizers, the preparation of blends, and the reinforcement of bioplastics with lignocellulosic components have shown promising and environmentally safe alternatives for overcoming the limitations of bioplastics, mainly due to the availability, biodegradability, and biocompatibility of such resources. This review addresses the production of bioplastics composed of polysaccharides from plant biomass and its advantages and disadvantages.

No abstract

Population growth and the way resources are being exploited are directly affecting the environment. The natural fiber market, for example, is worth billions of dollars and a huge amount of the fibers becomes waste. This considerable amount of waste motivates the study of the fibers as a reinforcement in polymeric matrix, which benefits both the environmental sustainability and technical-commercial development of new materials with good properties and reduced cost. In this study, jute fiber-reinforced composites previously manufactured from an industrial waste (W), polypropylene, compatibilizer, and nano-calcium carbonate (N), were exposed to natural and accelerated aging. The composites were tested by infrared spectroscopy, contact angle (CA) measurement, and tensile test. Infrared analysis showed greater oxidative degradation after accelerated aging. All CA values continued above 90° after natural aging. Among all compositions, the ones with the presence of N had the highest CA values, showing that N acted as a waterproofing agent. After accelerated aging, a significant decrease in all CA values was observed. The composites did not show significant variation in the elastic modulus after either aging. Deformation at break decreased significantly for compositions with no jute fiber in both aging programs. No remarkable reduction was observed in the compositions with jute fibers.

No abstract

To design more sustainable products often means improving the sustainability of materials. Currently, sustainable innovation calls upon materials to not only minimize environmental impacts but also to become circular. That requires efforts to keep materials functional for longer, avoid early disposal, and re-entering the cycle via recycling and other feedback processes. Those emerging challenges for materials development and the Circular Economy (CE) are especially critical in the case of polymers. How to develop strategies to preserve the value of polymers remains a question that mobilizes both researchers and practitioners. Technology Roadmapping (TRM) is a tool traditionally used for planning innovation processes and has supported the development of sustainable materials and other sustainability-related projects. This study tests TRM’s potential to assist with the planning of new circular polymers solutions and proposes the Circular TRM method. This proposition results from the case study of the development of waste-based fiber-polymer materials and strategies for getting them into the market. Our case study demonstrates how it would be possible to differentiate the various polymer material technologies and determine the most circular strategy path.

No abstract

No abstract

No abstract