No abstract

Key features in the success of the system included use of dedicated senior staff for Fast Track patients, and quarantining of clinical resources. The ED aiming to improve their waiting times and throughput should consider using complexity as a key criterion for triaging patients into separate streams. A low-complexity patient stream in the ED provides an ideal focus for advanced nursing practice.

Liquid phase crystallized silicon on glass with a thickness of (10–40) μm has the potential to reduce material costs and the environmental impact of crystalline silicon solar cells. Recently, wafer quality open circuit voltages of over 650 mV and remarkable photocurrent densities of over 30 mA/cm2 have been demonstrated on this material, however, a low fill factor was limiting the performance. In this work we present our latest cell progress on 13 μm thin poly-crystalline silicon fabricated by the liquid phase crystallization directly on glass. The contact system uses passivated back-side silicon hetero-junctions, back-side KOH texture for light-trapping and interdigitated ITO/Ag contacts. The fill factors are up to 74% and efficiencies are 13.2% under AM1.5 g for two different doping densities of 1 · 1017/cm3 and 2 · 1016/cm3. The former is limited by bulk and interface recombination, leading to a reduced saturation current density, the latter by series resistance causing a lower fill factor. Both are additionally limited by electrical shading and losses at grain boundaries and dislocations. A small 1 × 0.1 cm2 test structure circumvents limitations of the contact design reaching an efficiency of 15.9% clearly showing the potential of the technology.

Liquid phase crystallization of silicon (LPC-Si) on glass is a promising method to produce high quality multi-crystalline Si films with macroscopic grains. In this study, we report on recent improvements of our interdigitated back-contact silicon heterojunction contact system (IBC-SHJ), which enabled open circuit voltages as high as 661 mV and efficiencies up to 14.2% using a 13 µm thin n-type LPC-Si absorbers on glass. The influence of the BSF width on the cell performance is investigated both experimentally and numerically. We combine 1D optical simulations using GenPro4 and 2D electrical simulations using Sentaurus™ TCAD to determine the optical and electrical loss mechanisms in order to estimate the potential of our current LPC-Si absorbers. The simulations reveal an effective minority carrier diffusion length of 26 µm and further demonstrate that a doping concentration of 4×10 16 cm-3 and a back surface field width of 60 µm are optimum values to further increase cell efficiencies.

No abstract