The paper describes a novel technological approach to influencing the rheological properties of thermoplastic materials exposed to acoustic energy. The flow behavior of polypropylene with different mass percentages of glass fibers is investigated in a parallel plate rheometer under high-frequency longitudinal excitation. The influence of oscillation frequency on the melt viscosity is explained by means of shear thinning criteria. The dependence of the oscillation shape using sinusoidal excitation on shear thinning as a function of different fiber reinforcement percentages is also investigated. A phenomenological view describes the mutually influencing parameters with regard to different material compositions and different excitation frequencies over the time course of the rheometric measurement. Interacting relationships are analyzed and discussed and the potential of the actuator system to influence the plastic melt is worked out. Based on this, a technological approach follows which describes the transfer of an oscillating mold surface to plastics processing methods, which, especially in the case of energy-intensive injection molding technology, leads to the expectation of possible resource efficiency in energy and material.
Multi‐component micro‐injection molding enables the manufacturing of active elements as well as electrical contacting in situ and in a single process by using piezo active and electroconductive plastic compounds. Each compound is functionalized with filler materials according to its special demands. To this end, polypropylene (PP) with an electromechanical active filler based on piezoceramic powder (PZT: Lead zirconate titanate) for sensor functionality as well as PP with electroconductive properties based on carbon nanotubes (CNT) and carbon black (CB) for electrical contacting are investigated. Therefore, different compound compositions are analyzed with regard to their mechanical and electrical properties as well as their mechanical compatibility. For the analyses, micro injection molded samples of the different compounds are used. Furthermore, investigations on composite strength are conducted by measuring interlaminar shear strength between the functionalized compounds. Based on the material characterization, a simulation of the thermomechanical behavior is done and the process‐related residual stresses are analyzed. To achieve the prerequisites for fabricating sensor modules in mass production, the functionalized compounds should be processed by means of the two‐component micro‐injection molding technology. According to this, the objective target is a large‐scale integration of these piezo modules into multifunctional lightweight structures. Therefore, the modules are combined with electrically functionalized textile substrates creating semi‐finished products with sensor functionalities. The mechanical and electrical connections are created by ultrasonic welding. Applying this technology requires a manufacturing study with varying process parameters of joining force, amplitude and welding time with the aim of achieving minimal electrical contact resistance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.