By focusing light with a sphere several wavelengths in diameter, we can obtain a photonic nanojet [Opt. Express 13, 526 (2005)]: if light is focused on the surface of the sphere, the width of the beam stays smaller than the wavelength along a distance of propagation of approximately two wavelengths and reaches a high intensity. We use the rigorous Mie theory to analyze the basic properties of the photonic jet in the general three-dimensional polarized case. This fast algorithm allows us to determine the influence of the radius and the refractive index of the sphere on the photonic jet. The polarization response is also studied. We observe that high-intensity concentrations and subwavelength focusing are two different effects. Their basic properties are analyzed, and explanations are proposed.

No abstract

Abstract:We report for the first time on the experimental response of a Surface Plasmon Resonance fiber optic sensor based on wavelength modulation for hydrogen sensing. This approach of measuring the hydrogen concentration makes the sensor insensitive to intensity fluctuations. The intrinsic fiber sensor developed provides remote sensing and enables the possibility of multi-points sensing. The sensor consists of a multilayer of 35 nm Au / 180 nm SiO 2 / Pd deposited on a step-index multimode fiber core. The sensitivity and selectivity of the sensor are optimal at a Pd thickness of 3.75 nm. The sensor is sensitive to a hydrogen concentration ranging between 0.5 and 4% H 2 in Ar, with a response time less than 15 s.

Abstract:A new design of a fiber optic Surface Plasmon Resonance (SPR) sensor using Palladium as a sensitive layer for hydrogen detection is presented. In this approach, a transducer layer is deposited on the outside of a multimode fiber, after removing the optical cladding. The transducer layer is a multilayer stack made of a Silver, a Silica and a Palladium layer. The spectral modulation of the light transmitted by the fiber allows to detect the presence of hydrogen in the environment. The sensor is only sensitive to the Transverse Magnetic polarized light and the Traverse Electric polarized light can be used therefore as a reference signal. A more reliable response is expected for the fiber SPR hydrogen sensor based on spectral modulation instead of on intensity modulation. The multilayer thickness defines the sensor performance. The silica thickness tunes the resonant wavelength, whereas the Silver and Palladium thickness determine the sensor sensitivity. In an optimal configuration (NA = 0.22, 100 μm core radius and transducer length = 1 cm), the resonant wavelength is shifted over 17.6 nm at a concentration of 4% Hydrogen in Argon for the case of the 35 nm Silver/ 100 nm Silica/ 3 nm palladium multilayer.

No abstract