Microfluidics is an emerging field that has given rise to a large number of scientific and technological developments over the last few years. This review reports on the use of various materials, such as silicon, glass and polymers, and their related technologies for the manufacturing of simple microchannels and complex systems. It also presents the main application fields concerned with the different technologies and the most significant results reported by academic and industrial teams. Finally, it demonstrates the advantage of developing approaches for associating polymer technologies for manufacturing of fluidic elements with integration of active or sensitive elements, particularly silicon devices.

Since its introduction in the nineties, the negative resist SU-8 has been increasingly used in micro- and nanotechnologies. SU-8 has made the fabrication of high-aspect ratio structures accessible to labs with no high-end facilities such as X-ray lithography systems or deep reactive ion etching systems. These low-cost techniques have been applied not only in the fabrication of metallic parts or molds, but also in numerous other micromachining processes. Its ease of use has made SU-8 to be used in many applications, even when high-aspect ratios are not required. Beyond these pattern transfer applications, SU-8 has been used directly as a structural material for microelectromechanical systems and microfluidics due to its properties such as its excellent chemical resistance or the low Young modulus. In contrast to conventional resists, which are used temporally, SU-8 has been used as a permanent building material to fabricate microcomponents such as cantilevers, membranes, and microchannels. SU-8-based techniques have led to new low-temperature processes suitable for the fabrication of a wide range of objects, from the single component to the complete lab-on-chip. First, this article aims to review the different techniques and provides guidelines to the use of SU-8 as a structural material. Second, practical examples from our respective labs are presented.

Planar nanochannels are of particular significance in nanofluidics: keeping the width on the micrometre scale prevents the use of nanolithography while the depth stays in the nanometric range, i.e. below 100 nm. Fabrication of wide and shallow nanochannels in a plastic is known to be challenging due to the collapse of the structure during the sealing step. In this Technical Note, we demonstrate the simple and low-cost fabrication without nanolithography of monolithic and planar nanochannels by hot-embossing and bonding below the glass transition temperature.