Nanocomposite films of superhydrophobic surface are fabricated from the dispersion of unmodified carbon nanotubes (CNTs) and hydrophobic poly(isobutylene)-amine (PIB-amine). The PIB-amine prepared from the amidation of poly(isobutylene)-succinic anhydride and poly(oxypropylene)-amines is essential for dispersing the originally entangled CNTs into the debundled CNTs as observed by TEM. A robust CNTs/epoxy nanocomposite film with high dimensional stability is made by subsequent curing with epoxy resin. The self-standing film exhibits a superhydrophobic property, with water droplet contact angle > 152° due to the CNTs controlled alignment on the surface forming micrometer-size plateaus, as observed by SEM. The preparation of PIB-amine/CNTs dispersion and subsequently curing into a superhydrophobic CNTs/epoxy film is relatively simple and can potentially be applied to large surface coating.
We report the first fabrication of pigment particle-based electrowetting display (EWD) by using the requisite poly(isobutylene)-imide (PIB-imide) for effectively dispersing insoluble colorant in decane/water system. The series of PIB-imide dispersants were prepared from the amidation/imidation of PIB-succinic anhydride with different hydrophobic lengths and a suitable amine. The structurally tailored dispersants by adopting the highly hydrophobic PIB tails allows the formation of homogeneous dispersion of nanosized pigment particles in decane and clearly separated from water. The pigment dispersion at particle size of ca. 100 nm and a low viscosity of 2-3 cps was obtained and fabricated into an EWD device which was operated at a driving voltage of 15-20 V in achieving a maximum aperture ratio of 80%. With the advantage of both fast response time and vivid color, the pigment-based EWD, as shown in the video, stands out as a promising new option for future transparent display and serves as a critical foundation for the next-generation advanced display applications.
We have designed a class of highly hydrophobic dispersants for finely dispersing carbon black and organic pigment nanoparticles in apolar mediums. The synthesis involved the use of polyisobutylene-g-succinic anhydride (PIB-SA) and judiciously selected amines by amidation and imidation. The structures were characterized by infrared spectroscopy for anhydride functionalities in the starting materials and amide/imide linkages in the products. These polymeric forms of dispersants were structurally varied with respects to their PIB molecular weight, twin-tails, and linkages. Their relative performance for dispersing six different pigments in decane was evaluated against solution homogeneity, viscosity, stability, and particle size. The fine dispersion was achieved at particle sizes of ca. 100 nm, with the viscosity as low as 2-3 cP. The measurement of zeta potentials, which varied from -39.8 to -5.1 mV with pigment addition, revealed a strong surface-charge interaction between pigment and PIB dispersant molecules. Examination by TEM (transmission electronic microscope) showed the homogeneous dispersion of the primary structures of pigment particles at ca. 20 nm in diameter. The polymeric dispersants with different PIB tails and imide functionalities could be tailored for pigment stability in the oil phase, which is potentially suitable for the electrowetting devices.
Coating and laminating processes play an important role in textile industry. They are frequently used to produce fabric laminates during which the physical properties and appearance of textile fabrics are modified and enhanced. Currently, the adhesive property testing of a fabric laminate is done so by the use of pulling test machines such as Universal Tensile Tester, which measures the strength required to peel the tested materials apart. The adhesive test to date has not yet been performed using a newly developed machine, Rigid-Body Pendulum Rheometer (RPR). This study was to establish a more effective method for fast-evaluating adhesive properties of fabric laminates by assessing the performance of RPR. Specifically, RPR and Universal Tensile Tester were used to measure, respectively, the viscosity and peeling strength of PET/TPU (thermoplastic polyurethane) and nylon/TPU in response to UV exposure and water immersion. RPR can continuously observe and record viscosity behavior of tested samples in various temperature condition including from low temperature to high temperature, it not only measures viscosity speed, it also detects the differences in crosslinking and measures data generated during the softening process when the balanced time was achieved during the oscillations procedure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.