Droplet-based microfluidic systems have become a very powerful tool to miniaturize chemical and biological reactions. However, droplet content analysis remains challenging and relies almost exclusively on optical methods such as fluorescence spectroscopy. Hence, labeling of the analyte is typically required which impedes a more universal applicability of microdroplets. Here we present a novel interface coupling droplet microfluidics and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry for label-free content analysis of single droplets. Nanoliter aqueous droplets immersed in perfluorinated oil are created in a microfluidic T-junction, transferred into a capillary, and deposited on a high-density microarray MALDI plate mounted on a motorized xy-stage. The fully automated system is robust and reliable due to two unique features. First, a simple optical droplet detection system is used to synchronize stage movement and exit of droplets from the capillary. Second, the microarray plate contains an array of over 26,000 hydrophilic spots within a hydrophobic coating, each spot acting as a recipient to confine the droplets and to prevent cross-contamination. The MALDI matrix can also be applied using our system by spotting matrix droplets on the microarray in a separate run. To demonstrate the potential of our system, we studied the enzymatic cleavage of angiotensin I by angiotensin converting enzyme and monitored the increasing concentration of the product angiotensin II over time. The interface provides a robust and fully automated method for rapid label-free and information-rich content analysis of single droplets. With the high number of droplets per plate, this method is particularly suitable for high-throughput screening applications.
In this work, a novel droplet microfluidic sample introduction system for inductively coupled plasma mass spectrometry (ICPMS) is proposed and characterized. The cheap and disposable microfluidic chip generates droplets of an aqueous sample in a stream of perfluorohexane (PFH), which is also used to eject them as a liquid jet. The aqueous droplets remain intact during the ejection and can be transported into the ICP with >50% efficiency. The transport is realized via a custom-built system, which includes a membrane desolvator necessary for the PFH vapor removal. The introduction system presented here can generate highly monodisperse droplets in the size range of 40–60 μm at frequencies from 90 to 300 Hz. These droplets produced very stable signals with a relative standard deviation (RSD) comparable to the one achieved with a commercial droplet dispenser. Using the current system, samples with a total volume of <1 μL can be analyzed. Moreover, the capabilities of the setup for introduction and quantitative elemental analysis of single cells were described using a test system of bovine red blood cells. In the future, other modules of the modern microfludics can be integrated in the chip, such as on-chip sample pretreatment or parallel introduction of different samples.
Multivesicular vesicles (MVVs) are artificial liposomal structures widely used as a platform to study the compartmentalisation of cells and as a scaffold for artificial cell/protocell models. Current preparation techniques for MVVs, however, offer poor control on the size, lamellarity, and loading of inner lipid vesicles. Here, we introduce a microfluidic device for the production of multivesicular droplets (MVDs): a novel model system combining the ease of use and control of droplet microfluidics with the biological relevance of MVVs. We use a perfluorinated carrier phase with a biocompatible surfactant to generate monodisperse droplets of an aqueous giant unilamellar lipid vesicle suspension. The successful on-chip formation and stability of MVDs is verified through high-speed microscopy. For bright field or fluorescence microscopy inspection, the MVDs are trapped in an array where the integrity of both lipid vesicles and droplets is preserved for up to 15 minutes. Finally, we show a two-step enzymatic reaction that takes place across the lipid vesicle membranes; the second reaction step occurs in the vesicle's interior, where the enzyme is encapsulated, while both the substrate and fluorescent product permeate across the membrane. Our approach opens the possibility to mimic artificial organelles with optimised reaction parameters (pH, ions, etc.) in each compartment.
We present a microfluidic device that is able to trap multiple giant unilamellar vesicles (GUVs) and initiate electrofusion via integrated microelectrodes. PDMS posts were designed to trap and isolate two or more vesicles. Electrodes patterned onto the glass surface of the microchannels are able to apply a short, high voltage pulse across the traps for controllable electrofusion of the GUVs. The entire array of traps and electrodes are designed such that an average of 60 individual fusion experiments can be performed on-chip. An assay based on Förster resonance energy transfer (FRET) is performed to show successful lipid mixing. Not only can the device be used to record the dynamics of lipid membrane fusion, but it can be used for reaction monitoring by fusing GUVs containing reactants. We demonstrate this by fusing vesicles encapsulating femtolitre volumes of cobalt chloride or EDTA and monitoring the amount of the complexation product over time.
Here, we present a multifunctional microfluidic device whose integrative design enables to combine cell culture studies and quantitative single cell biomolecule analysis. The platform consists of 32 analysis units providing two key features; first, a micrometer-sized trap for hydrodynamic capture of a single Saccharomyces cerevisiae (S. cerevisiae) yeast cell; second, a convenient double-valve configuration surrounding the trap. Actuating of the outer valve with integrated opening results in a partial isolation in a volume of 11.8 nL, i.e. the cell surrounding fluid can be exchanged diffusion-based without causing shear stress or cell loss. Actuation of the inner ring-shaped valve isolates the trapped cell completely in a small analysis volume of 230 pL. The device was used to determine the growth rate of yeast cells (S. cerevisiae) under under optimum and oxidative stress conditions. In addition, we successfully quantified the cofactor beta-nicotinamide adenine dinucleotide phosphate (NAD(P)H) in single and few cells exposed to the different microenvironments. In conclusion, the microdevice enables to analyze the influence of an external stress factor on the cellular fitness in a fast and more comprehensive way as cell growth and intracellular biomolecule levels can be investigated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.