No abstract

In this work, monitoring of the transmit power for several base stations operating in a live 5G network (Telstra, Australia) was conducted with the purpose of analyzing the radio frequency (RF) electromagnetic field (EMF) exposure levels. The base stations made use of state-of-the-art massive MIMO antennas utilizing beamforming in order to optimize the signal strength at the user’s device. In order to characterize the actual EMF exposure from 5G base stations, knowledge of the amount of power dynamically allocated to each beam is therefore of importance. Experimental data on the spatial distribution of the base stations’ transmit power were gathered directly from the network by extracting information on the radio and baseband operations. Out of more than 13 million samples collected over 24 h, the maximum time-averaged power per beam direction was found to be well-below the theoretical maximum and lower than what was predicted by the existing statistical models. The results show that assuming constant peak power transmission in a fixed beam direction leads to an unrealistic EMF exposure assessment. This work provides insights relevant for the standardization of EMF compliance assessment methodologies applicable for 5G base stations.

No abstract

The aim of this paper is to present results on output power level distributions of radio base stations (RBSs) and user devices connected to a wideband code division multiple access-based third generation (3G) mobile communication network in India and relate the results to realistic human exposure to radio frequency (RF) electromagnetic field (EMF) emitted by the corresponding RBSs and the devices. The output power level distributions have been obtained through network-based measurements. In downlink, data from 868 RBSs were gathered during seven days. The RBSs were connected to five different radio network controllers (RNCs) located in different regions of India. The mean, the median, and the 95th percentile RBS output power values were found to be 24%, 21%, and 53%, respectively, of the maximum available power. In the uplink direction, output power levels of 3G devices connected to 1256 RBSs and the same five RNCs as in the downlink were assessed separately for voice, data, voice + data, and video applications. In total, more than 1 million hours of data traffic and more than 700 000 h of voice calls were measured in the uplink. The mean output power for the voice, data, the voice + data, and the video were found to be around 1%, 3%, 2%, and 4%, respectively, of the maximum available power for the 3G user devices. The findings are in line with previously published results obtained in other networks in Europe, and demonstrate that knowledge on realistic power levels is important for accurate assessments of the RF EMF exposure.INDEX TERMS Output power, power distributions, realistic exposure, UMTS, WCDMA.

No abstract