No abstract

The aim of this paper is to define a simple and useful formula to predict wave transmission for a common type of floating breakwater (FB), supplied with two lateral vertical plates protruding downward, named p-type FB. Eight different models, with mass varying from 16 to 76 kg, anchored with chains, have been tested in the wave flume of the Maritime Laboratory of Padova University, under irregular wave conditions. Water elevation in front and behind the structure has been measured with two arrays of four wave gauges. Our starting point for the prediction of wave transmission was the classical relationship established by Macagno in 1954. His relationship was derived for a box-type fixed breakwater assuming irrotational flow. Consequently, he significantly underestimated transmission for short waves and large drafts. This paper proposes an empirical modification of his relationship to properly fit the experimental results and a standardized plotting system of the transmission coefficient, based on a simple nondimensional variable. This variable is the ratio between the peak period of the incident wave and an approximation of the natural period of the heave oscillation. A fairly good accuracy of the prediction is found analyzing the data in the literature relative to variously moored p-type FBs, tested in small-scale wave tanks under regular and irregular wave conditions.

This note presents the Seabreath wave energy converter, basically a multi-chamber floating oscillating water column device, and the lumped model used to size its chambers, the ducts and the turbine. The model is based on extensive testing carried out in the wave flume of the University of Padova using fixed and floating models with a dummy power take off and indirect measurement of the produced power. A map with the available energy in the Mediterranean Sea is also proposed, showing possible ideal application sites. The Seabreath is finally dimensioned for a quarter scale test application in the Adriatic Sea, with a 3 kW turbine, and a capacity factor of 40%.

DisclaimerInforma UK Limited, trading as Taylor & Francis Group, make every effort to ensure the accuracy of all the information (the "Content") contained in our publications. However, Informa UK Limited, trading as Taylor & Francis Group, our agents, and our licensors make no representations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of the Content. Any opinions and views expressed in this publication are the opinions and views of the authors, and are not the views of or endorsed by Informa UK Limited, trading as Taylor & Francis Group. The accuracy of the Content should not be relied upon and should be independently verified with primary sources of information. Informa UK Limited, trading as Taylor & Francis Group, shall not be liable for any losses, actions, claims, proceedings, demands, costs, expenses, damages, and other liabilities whatsoever or howsoever caused arising directly or indirectly in connection with, in relation to or arising out of the use of the Content.