No abstract

This paper presents an optimization study of the geometry of three-dimensional microthrust bearings in a wide range of convergence ratios. The optimization goal is the maximization of the bearing load carrying capacity. The bearings are modeled as microchannels, consisting of a smooth moving wall (rotor), and a stationary wall (stator) with partial periodic rectangular texturing. The flow field is calculated from the numerical solution of the Navier-Stokes equations for incompressible isothermal flow; processing of the results yields the bearing load capacity and friction coefficient. The geometry of the textured channel is defined parametrically for several width-to-length ratios. Optimal texturing geometries are obtained by utilizing an optimization tool based on genetic algorithms, which is coupled to the CFD code. Here, the design variables define the bearing geometry and convergence ratio. To minimize the computational cost, a multi-objective approach is proposed, consisting in the simultaneous maximization of the load carrying capacity and minimization of the bearing convergence ratio. The optimal solutions, identified based on the concept of Pareto dominance, are equivalent to those of singleobjective optimization problems for different convergence ratio values. The present results demonstrate that the characteristics of the optimal texturing patterns depend strongly on both the convergence ratio and the width-to-length ratio. Further, the optimal load carrying capacity increases at increasing convergence ratio, up to an optimal value, identified by the optimization procedure. Finally, proper surface texturing provides substantial load carrying capacity even for parallel or slightly diverging bearings. Based on the present results, we propose simple formulas for the design of textured micro-thrust bearings.

No abstract

Design of piston rings is a very crucial subject in the field of internal combustion engines. In the present paper, a numerical model is created using the Navier–Stokes equations. Fluid–structure interaction analysis is performed in order to calculate the structural integrity of the ring for several engine operational conditions and texturing patterns. This paper illustrates the hydrodynamic friction force under various surface artificial texturing in terms of spherical and rectangular microdimples. Piston ring stress analysis is also investigated due to gas leakage. Results show a substantial reduction of the friction using rectangular texturing and less reduction using spherical texturing. The rectangular microdimple parameters were considered to obtain a better friction reduction with the following configurations: Hd = 4 µm, ρτ = 0.61, λ = 20 and s = 0.004. Each rectangular texture cell is defined by the dimple depth, Hd; the texture density, ρτ; the dimple aspect ratio, λ; and the relative dimple depth, s. Copyright © 2014 John Wiley & Sons, Ltd.

No abstract

No abstract

No abstract

No abstract