No abstract

We present the combined configuration of dielectric helical cone and metallic granary-shaped nanotip to produce three -dimensional vector vortex nanofocused optical field. The intensity and phase of the electric fields, and Povnting vector of the optical field generated by the combined configuration with linearly polarized illumination are studied with three-dimensional finite difference time-domain method. The localized vector electric field near the apex of the metallic granary-shaped nanotip is strongly depended on the chirality of the dielectric helical cone and the bottom radius of the metallic granary-shaped nanotip. The localized vector electric field is wavelength selective with the maximum intensity enhancement up to 10 times and minimum size of about 900 nm, and the maximum radial electric field rotates 67.0° along z axis. This indicates the vector vortex beam generated by the combined configuration can be applied in nanofabrication, nano-sensing and nano-manipulation.

The traditional theta modulator encodes input information by superimposing Ronchi sub-gratings, which is extremely easy to cause spatial channel overlap that results in bands mixing. In this case, we present an all-dielectric theta modulation meta-surface with a new encoding method, which separates red, green, blue, and achromatic spatial channels on the focal plane. The meta-surface ensures that the positions of focal points are relatively consistent while focusing energy into the sub-wavelength regions. Our study offers a way to facilitate device miniaturization and system integration, which may have an important application in compact multispectral photography only with one detector.

Introducing disorder into a periodic nanostructure can lead to specific optical behaviors. We present a method of anodic oxidation by adjusting the applied voltage and process time to introduce disorder to TiO 2 nanotubes. The surface morphology of TiO 2 was numerically investigated according to the morphologies measured with a scanning electron microscope by imaging processing and a statistical method. TiO 2 nanotubes obtained under different fabrication conditions have various tube radii ranging from 20-40 nm and wall thicknesses ranging from 20-70 nm. We also evaluated the degree of disorder of the tube radius of the TiO 2 nanotubes. The reflected scattering light distributions of laser sources were optically measured at different observing distances, which indicate that the presence of nanotubes enhances the scattering effect, reducing the scattered light intensity by more than 75%, and provide the relationship between the scattering effect and surface morphology of nanotubes. This discovery offers TiO 2 nanotubes important application prospects in optical limiting and light confinement, such as stealth coating.

Light sheet fluorescence microscopy has become a research hotspot in biomedicine because of low phototoxicity, high speed, and high resolution. However, the conventional methods to acquire threedimensional spatial information are mainly based on scanning, which inevitably increases photodamage and is not real-time. Here, we propose a method to generate controllable multi-planar illumination with a dielectric isosceles triangular array and a design of multi-planar light sheet fluorescence microscopy system. We carry out experiments of three-dimensional illumination beam measurement, volumetric imaging of fluorescent microspheres, and dynamic in vivo imaging of zebrafish heart to evaluate the performance of this system.In addition, we apply this system to study the effects of bisphenol fluorene on the heart shape and heart-beating rate of zebrafish. Our experiment results indicate that the multi-planar light sheet microscopy system provides a novel and feasible method for three-dimensional selected plane imaging and lowphototoxicity in vivo imaging.