Industry sector has an important impact on primary energy consumption at the international level, and solar energy constitutes a real alternative to cover these energy needs partially. Among thermosolar concentration technologies, Linear Fresnel Collector (LFC) technology has some advantages that make it more accessible to industries. With the aim of providing new tools for easier decision-making processes, in the present work, several energy audits were carried out in industries (located in the south-west of Europe, with considerable steam consumptions), quantifying thermal and energy consumptions and defining both work schedules and seasonality. Afterwards, a comparison based on three factors was carried out: Thermal consumption regarding total industry consumption, the performance of the work during the solar schedule, and the quantification of the monthly average concentrated energy for a certain LFC facility. The analysis carried out according to these criteria showed different results for each case, making a global assessment necessary to suitably ponder each factor. This analysis ranked tomato industries as the most suitable for LFC technology, due to the fact that their main operating period was during the months with the highest solar isolation, and the solar schedule was completely integrated in a 24-h working day. Also, industrial waxes and laundries showed a good combination of both facts.Energies 2019, 12, 4049 2 of 15 26% of primary energy consumption [16]. Furthermore, heat generation processes in industry constitute 54% of the total energy consumption in Europe in contrast with 17% of the total energy consumption corresponding to electric uses. This proportion of energy use justifies the implementation of solar thermal-based systems [17].Solar thermal systems harness solar energy for heating, either as hot water for domestic use-domestic hot water and heating-as a heating source for fluids in industrial processes or as steam to produce mechanical energy in a turbine to obtain electrical energy. Solar thermal systems may have concentrators to direct solar isolation that strikes the capturing surface area towards a smaller area (absorber area). This configuration obtains higher temperatures in the heat transfer fluid. These devices achieve solar concentration using specular reflection; thus, only direct isolation is used.There are two different technologies that concentrate direct solar isolation: Point focus type, that concentrates isolation into a single point-solar power tower or Dish-Stirling system-and linear focus type, which concentrates isolation into a linear receptor. Linear focus type reaches higher temperatures, because it concentrates isolation into a larger area. There are two types of linear focus collectors: Parabolic trough collector (PTC) and linear Fresnel collectors [18,19].Several studies have shown LFC (Linear Fresnel Collector) optical quality and thermal efficiency is slightly lower than in the case of PTC, due to the high influence of the angle of incidence and the cosine fa...
Ionic polymer-metal composites (IPMCs) are electrically driven materials that undergo bending deformations in the presence of relatively low external voltages, exhibiting a great potential as actuators in applications in soft robotics, microrobotics, and bioengineering, among others. This paper presents an artificial eukaryotic flagellum (AEF) swimming robot made up of IPMC segments for the study of planar wave generation for robot propulsion by single and distributed actuation, i.e., considering the first flagellum link as an actuator or all of them, respectively. The robot comprises three independent and electrically isolated actuators, manufactured over the same 10 mm long IPMC sheet. For control purposes, a dynamic model of the robot is firstly obtained through its frequency response, acquired by experimentally measuring the flagellum tip deflection thanks to an optical laser meter. In particular, two structures are considered for such a model, consisting of a non-integer order integrator in series with a resonant system of both non-integer and integer order. Secondly, the identified models are analyzed and it is concluded that the tip displacement of each actuator or any IPMC point is characterized by the same dynamics, which remains unchanged through the link with mere variations of the gain for low-frequency applications. Based on these results, a controller robust to gain variations is tuned to control link deflection regardless of link length and enabling the implementation of a distributed actuation with the same controller design. Finally, the deflection of each link is analyzed to determine whether an AEF swimming robot based on IPMC is capable of generating a planar wave motion by distributed actuation.
We study experimentally and numerically the onset of tip streaming in an electrified droplet. The experiments show that, for a sufficiently small dimensionless conductivity, the droplet apex oscillates before ejecting a liquid jet. This effect is caused by the limited charge transfer from the bulk to the interface. This reduces the electrostatic pressure at the droplet's stretching tip, preventing liquid ejection. This reduction of electrostatic pressure is compensated for by the electric shear stress arising during the apex oscillations, which eventually leads to the jet formation. The stability limit calculated from the global stability analysis perfectly agrees with the experimental results. However, this analysis predicts non-oscillatory, non-localized instability in all the cases, suggesting that both the oscillatory behavior and the small local scale characterizing tip streaming arise during the nonlinear droplet deformation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.