Growing energy demands are driving people to generate power in every possible way. New energy sources are needed to plug the energy gap. There is a growing interest in distributed energy generation due to its remarkable advantages such as flexibility, reliability, adaptability and minimal transmission losses. Thermoelectric generators (TEGs) are one such distributed power source that relies on thermal energy for electricity generation. The current review focusses on the design and optimization of TEGs to maximize the power output from the available thermal sources. The basic principle of thermoelectricity generation and suitable architecture for specific applications are explained with an overview of materials and manufacturing processes. Various cooling techniques to dissipate heat from the cold side and their influence on overall efficiency are reviewed in this work. Applications of TEGs for powering biomedical sensors have been discussed in detail. Recent advancements in TEGs for various implantable devices and their power requirements are evaluated. The exploitation of TEGs to generate power for wearable sensors has been presented, along with published experimental data. It is envisioned that this study will provide profound knowledge on TEG design for specific applications, which will be helpful for future endeavours.
Darrieus-type Vertical Axis Wind Turbines (VAWT) are promising for small scale decentralized power generation because of their unique advantages such as simple design, insensitive to wind direction, reliability, and ease of maintenance. Despite these positive aspects, poor self-starting capability and low efficiency in weak and unsteady winds deteriorate further development. Adaptive Hybrid Darrieus Turbine (AHDT) was proposed by the author in the past study as a potential solution to enhance low wind speed characteristics. The objective of the current research is to optimize the parameters of AHDT. AHDT integrates a dynamically varying Savonius rotor with a Darrieus rotor. A fully detailed 2D numerical study employing Reynold-Averaged Navier Stokes (RANS) is carried out to investigate the impact of the Darrieus rotor diameter (DR) on the Savonius rotor (DT) with regard to hybrid turbine performance. The power coefficient of the Darrieus rotor is evaluated when the Savonius rotor is in the closed condition (cylinder) of various diameters. The influence of Reynolds number (Re) on the torque coefficient is examined. Power loss of 58.3% and 25% is reported for DR/DT ratio of 1.5 and 2 respectively for AHDT with solidity 0.5 at 9 m/s. The flow interaction between the Savonius rotor in closed configuration reveals the formation of von Karman vortices that interact with Darrieus blades resulting in flow detachment. An optimum diametrical ratio (DR/DT) of 3 is found to yield the maximum power coefficient of the Darrieus rotor.
Darrieus wind turbines are simple lift based machines with exceptionally high efficiencies in terms of power coefficient compared to similar drag based vertical axis turbines. However, in low Reynolds numbers, a notable performance loss was reported. As a potential solution, truncated NACA
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.