Abstract-Corn cobs were evaluated as raw material in the production of an adsorbent for phenol removal from aqueous solutions. Adsorption kinetics and equilibrium were satisfactorily described by the pseudo second-order and Freundlich models, respectively. Fixed bed adsorption (breakthrough curve) was satisfactorily described by Bohart-Adams, Yoon-Nelson and Dose-Response models. Adsorption tests showed that the prepared adsorbent presented higher adsorption capacity than activated carbons produced from other agricultural residues, confirming that this type of waste material is a suitable candidate for use in the production of adsorbents.
This paper presents a comparative evaluation of three lignocellulosic residues (corn cobs, spent coffee grounds and Raphanus sativus press cake) as precursor materials in the production of activated carbons (ACs). Results indicate that the precursor material has a significant effect in both physical and chemical aspects of the adsorbent as well as on the adsorption mechanisms. Highest and lowest values of iodine number and density were observed for ACs based on press cake and corn cobs, respectively. Regardless of the observed differences in surface chemical make-up and adsorption mechanisms, all employed materials were deemed adequate for adsorbent production, since the prepared ACs presented adsorption capacities similar or even higher than those of commercial ACs and other residue-based adsorbents.
(um espaço) RESUMO -O fenol aparece em diversos tipos de efluentes industriais, como refinarias de petróleo, tintas e papel. Tal composto é considerado um poluente prioritário por ser danoso aos organismos já em baixas concentrações e pode ser tóxico em níveis mais elevados. A adsorção por carvão ativado (CA) é o método de remoção mais utilizado. Devido à necessidade de um processo de regeneração do CA, existe um aumento dos custos. Portanto, busca-se adsorventes alternativos de baixo custo que apresentem capacidade de adsorção apropriada. Dessa forma, o presente trabalho objetivou desenvolver um adsorvente alternativo a base de sabugo de milho para remoção de fenol de solução aquosa. O sabugo foi submetido a seguinte tratamento: i) secagem a 105 o C por 18h; ii) ativação com ácido fosfórico (85%); iii) 2h de carbonização em forno mufla a 500 o C; iv) lavagem com hidróxido de sódio até pH neutro e v) secagem a 105°C por 12h. O desempenho do CA produzido foi avaliado em ensaios de adsorção em batelada, para remoção do fenol de soluções aquosas, e ensaio de adsorção em coluna, visando posterior aplicação industrial. Foram realizados procedimentos de caracterização superficial, como análise em infravermelho (IV) e titulação de Boehm, objetivando a compreensão do mecanismo pelo qual o processo de adsorção ocorre. Os resultados obtidos demonstraram que o tratamento foi efetivo na produção de um CA seletivo para remoção de fenol.(um espaço) INTRODUÇÃOFenóis aparecem em efluentes residuais de indústrias, como de conversão de carvão a altas temperaturas, refinarias de petróleo, resinas e outras, e são considerados poluentes prioritários, por serem tóxicos aos seres vivos. Dessa maneira, é necessário remover o fenol de efluentes industriais antes do lançamento destes em cursos d'água, e, em condições apropriadas, podem ser recuperados desses efluentes de maneira econômica. Entretanto, os melhores métodos para tratar esses efluentes são por oxidação química ou por adsorção (Bello et al., 2013). A adsorção por carvão ativado é o método mais frequentemente utilizado. Recentemente, houve um crescente aumento de pesquisas na literatura voltadas para o estudo de adsorção para remoção de fenol com CAs (Bello et al., 2013), em que o fenol permanece retido na superfície do carvão. A maior desvantagem desta técnica é a saturação do adsorvente, que torna necessária a regeneração do CA. O processo de regeneração promove perda de CA, eleva custos de operação do processo e diminui a capacidade de adsorção a cada ciclo de regeneração. Tais aspectos incentivaram a Área temática: Engenharia Ambiental e Tecnologias Limpas 1
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.