Bimolecular recombination in organic semiconductors is known to follow the Langevin expression, i.e., the rate of recombination depends on the sum of the mobilities of both carriers. We show that this does not hold for polymer/fullerene bulk heterojunction solar cells. The voltage dependence of the photocurrent reveals that the recombination rate in these blends is determined by the slowest charge carrier only, as a consequence of the confinement of both types of carriers to two different phases.
We report here the synthesis and characteristics of a new C 84 adduct ([84]PCBM), realized via a diazoalkane addition reaction. [84]PCBM was obtained as a mixture containing three major isomers.[84]PCBM was tested in a fullerene/poly(2-methoxy-5-(3′,7′-dimethyloctyloxy)-p-phenylene vinylene) (MDMO-PPV) bulk heterojunction solar cell as the first C 84 derivative to be applied in device fabrication. Spin coating the active layer blend from 1-chloronaphthalene (the very best fullerene solvent) instead of ortho-dichlorobenzene was necessary to obtain the more efficient photovoltaic device. The PV results indicate that the hole mobility of MDMO-PPV may not be increased upon blending with [84]PCBM. This explains the relatively low I SC of the device as due to the buildup of space charge. The V OC of the device is ∼500 mV lower than that of the one with [60]PCBM, while [84]PCBM has a 350 mV higher electron affinity than [60]PCBM. This loss surpasses the linear relation between the donor HOMOacceptor LUMO energy gap and the V OC in this type of device. A maximum power conversion efficiency of 0.25% was reached for the MDMO-PPV:[84]PCBM cells.
The use of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) in combination with ZnO as middle electrode in solution-processed organic tandem solar cells requires a pH modification of the PEDOT:PSS dispersion. We demonstrate that this neutralization leads to a reduced work function of PEDOT:PSS, which does not affect the performance of polythiophene:fullerene solar cells, but results in a lower open-circuit voltage of devices based on a polyfluorene derivative with a higher ionization potential. The introduction of a thin layer of a perfluorinated ionomer recovers the anode work function and gives an open-circuit voltage of 1.92 V for a double junction polyfluorene-based solar cell.
The charge transport in white light-emitting polymers was investigated using hole-only devices of a series of copolymers. The series consists of three spirobifluorene copolymers with a common backbone. The polymers contain an increasing number of dyes that are included into the backbone to achieve white light emission. Because the dyes have different band gaps than the backbone, it is expected that they will hamper the charge transport in the polymer since they will result in electron traps or hole traps, or both. In this experiment we demonstrate that the dyes in the polymers under investigation have no influence on the hole transport. We therefore conclude that the dyes have their HOMO levels aligned and are thus likely to function as electron traps.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.