No abstract

This paper reports performance evaluation of two-stroke, single cylinder spark ignition (SI) engine with methanol blended gasoline (80% gasoline, 20% methanol by volume) having copper coated engine (CCE) [copper (thickness, 300 lm) coated on piston crown, and inner side of cylinder head] provided with catalytic converter with sponge iron as catalyst and compared with conventional SI engine with gasoline operation. Brake thermal efficiency increased with methanol blended gasoline with both versions of the engine. CCE showed improved performance when compared to conventional engine (CE) with both test fuels. Catalytic converter with air injection significantly reduced pollutants with both test fuels on both configurations of the engine.

Investigations were carried out to evaluate the performance of a low heat rejection (LHR) diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown, air gap insulated liner with superni insert and ceramic coated cylinder head with different operating conditions of crude jatropha oil (CJO) with varied injection timing and injector opening pressure . Performance parameters [brake thermal efficiency, exhaust gas temperature, coolant load and volumetric efficienc and exhaust emissions [smoke and oxides of nitroge were determined at various values of brake mean effective pressure (BMEP). Combustion characteristics [ peak pressure, time of occurrence of peak pressure and maximum rate of pressure ris of the engine were at peak load operation of the engine. Conventional engine (CE) showed deteriorated performance, while LHR engine showed improved performance with vegetable operation at recommended injection timing and pressure. The performance of both versions of the engine improved with advanced injection timing and higher injector opening pressure when compared with CE with pure diesel operation. Relatively, peak brake thermal efficiency increased by 14%, smoke levels decreased by 27% and NOx levels increased by 49% with vegetable oil operation on LHR engine at its optimum injection timing, when compared with pure diesel operation on CE at manufacturers recommended injection timing.

No abstract

Investigations are carried out to evaluate the performance of a low heat rejection (LHR) diesel engine with ceramic coated cylinder head [ceramic coating of thickness 500 microns is done on inside portion of cylinder head] with different operating conditions [normal temperature and pre-heated temperature] of crude Pongamia oil (CPO) with varied injection pressure and injection timing. Performance parameters and pollution levels are determined at various magnitudes of brake mean effective pressure. Combustion characteristics at peak load operation of the engine are measured with special pressure-crank angle software package. Conventional engine (CE) showed deteriorated performance, while LHR engine showed improved performance with CPO operation at recommended injection timing and pressure and the performance of both version of the engine is improved with advanced injection timing and at higher injection pressure when compared with CE with pure diesel operation. The optimum injection timing is 31°bTDC for conventional engine while it is 29°bTDC with LHR engine with vegetable oil operation. Peak brake thermal efficiency increased by 5%, smoke levels decreased by 2% and NOx levels increased by 40% with CPO operation on LHR engine at its optimum injection timing, when compared with pure diesel operation on CE at manufacturer’s recommended injection timing.