Context. The tenuous nitrogen (N2) atmosphere on Pluto undergoes strong seasonal effects due to high obliquity and orbital eccentricity, and has recently (July 2015) been observed by the New Horizons spacecraft. Aims. The main goals of this study are (i) to construct a well calibrated record of the seasonal evolution of surface pressure on Pluto and (ii) to constrain the structure of the lower atmosphere using a central flash observed in 2015. Methods. Eleven stellar occultations by Pluto observed between 2002 and 2016 are used to retrieve atmospheric profiles (density, pressure, temperature) between altitude levels of ~5 and ~380 km (i.e. pressures from ~ 10 μbar to 10 nbar). Results. (i) Pressure has suffered a monotonic increase from 1988 to 2016, that is compared to a seasonal volatile transport model, from which tight constraints on a combination of albedo and emissivity of N2 ice are derived. (ii) A central flash observed on 2015 June 29 is consistent with New Horizons REX profiles, provided that (a) large diurnal temperature variations (not expected by current models) occur over Sputnik Planitia; and/or (b) hazes with tangential optical depth of ~0.3 are present at 4–7 km altitude levels; and/or (c) the nominal REX density values are overestimated by an implausibly large factor of ~20%; and/or (d) higher terrains block part of the flash in the Charon facing hemisphere.

Context. The vertical component of the magnetic field was found to reach a constant value at the boundary between penumbra and umbra of stable sunspots in a recent statistical study of Hinode/SP data. This finding has profound implications as it can serve as a criterion to distinguish between fundamentally different magneto-convective modes operating in the sun. Aims. The objective of this work is to verify the existence of a constant value for the vertical component of the magnetic field (B⊥) at the boundary between umbra and penumbra from ground-based data in the near-infrared wavelengths and to determine its value for the GREGOR Infrared Spectrograph (GRIS@GREGOR) data. This is the first statistical study on the Jurčák criterion with ground-based data, and we compare it with the results from space-based data (Hinode/SP and SDO/HMI). Methods. Eleven spectropolarimetric data sets from the GRIS@GREGOR slit-spectograph containing fully-fledged stable sunspots were selected from the GRIS archive. SIR inversions including a polarimetric straylight correction are used to produce maps of the magnetic field vector using the Fe I 15648 Å and 15662 Å lines. Averages of B⊥ along the contours between penumbra and umbra are analyzed for the 11 data sets. In addition, contours at the resulting B⊥const are drawn onto maps and compared to intensity contours. The geometric difference between these contours, ΔP, is calculated for each data set. Results. Averaged over the 11 sunspots, we find a value of B⊥const = (1787 ± 100) gauss. The difference from the values previously derived from Hinode/SP and SDO/HMI data is explained by instrumental differences and by the formation characteristics of the respective lines that were used. Contours at B⊥ = B⊥const and contours calculated in intensity maps match from a visual inspection and the geometric distance ΔP was found to be on the order of 2 pixels. Furthermore, the standard deviation between different data sets of averages along umbra–penumbra contours is smaller for B⊥ than for B∥ by a factor of 2.4. Conclusions. Our results provide further support to the Jurčák criterion with the existence of an invariable value B⊥const at the umbra–penumbra boundary. This fundamental property of sunspots can act as a constraining parameter in the calibration of analysis techniques that calculate magnetic fields. It also serves as a requirement for numerical simulations to be realistic. Furthermore, it is found that the geometric difference, ΔP, between intensity contours and contours at B⊥ = B⊥const acts as an index of stability for sunspots.

Using high-resolution spectropolarimetric data recorded with the Swedish 1 m Solar Telescope, we have identified several instances of granular lanes traveling into granules. These are believed to be the observational signature of underlying tubes of vortical flow with their axis oriented parallel to the solar surface. Associated with these horizontal vortex tubes, we detect in some cases a significant signal in linear polarization, located at the trailing dark edge of the granular lane. The linear polarization appears at a later stage of the granular lane development, and is flanked by patches of circular polarization. Stokes inversions show that the elongated patch of linear polarization signal arises from the horizontal magnetic field aligned with the granular lane. We analyze snapshots of a magnetohydrodynamic numerical simulation and find cases in which the horizontal vortex tube of the granular lane redistributes and transports the magnetic field to the solar surface causing a polarimetric signature similar to what is observed. We thus witness a mechanism capable of transporting magnetic flux to the solar surface within granules. This mechanism is probably an important component of the small-scale dynamo supposedly acting at the solar surface and generating the quiet-Sun magnetic field.

Accurate flow measurement is a ubiquitous task in fields such as industry, medical technology, or chemistry; it remains however challenging due to small measurement ranges or erosive flows. Inspiration for possible measurement methods can come from nature, for example from the lateral line organ of fish, which is comprised of hair cells embedded in a gelatinous cupula. When the cupula is deflected by water movement, the hair cells generate neural signals from which the fish gains an accurate representation of its environment. We built a flow sensor mimicking a hair cell, but coupled it with an optical detection method. Light is coupled into a PDMS waveguide that consists of a core and a cladding with a low refractive index contrast to ensure high bending sensitivity. Fluid flow bends the waveguide; this leads to a measurable light loss. The design of our sensory system allows flow measurement in opaque and corrosive fluids while keeping production costs low. To prove the measurement concept, we evaluated the light loss while (a) reproducibly bending the fiber with masses, and (b) exposing the fiber to air flow. The results demonstrate the applicability of an optical fiber as a flow sensor.

Abstract. The accumulation of dust and soil on the surface of solar reflectors is an important factor reducing the power output of solar power plants. Therefore the effect of accumulated dust on the specular reflectance of solar mirrors should be understood well in order to improve the site-dependent performance prediction. Furthermore, an optimization of the CSP System maintenance, in particular the cleaning cycles, can be achieved. Our measurements show a noticeable decrease of specular reflectance when the angle of incidence is increased. This effect may be explained by shading and blocking mechanisms caused by dirt particles. The main physical causes of radiation loss being absorption and scattering, the near-angle scattering leads to a further decrease of specular reflectance for smaller angles of acceptance. Within this study mirror samples were both outdoor exposed and indoor artificially soiled. For indoor soiling, the mirror samples were artificially soiled in an in-house developed dusting device using both artificial-standardized dust and real dust collected from an arid outdoor test field at the Negev desert. A model function is proposed that approximates the observed reduction of specular reflectance with the incidence angle with a sufficient accuracy and by simple means for this soil type. Hence a first step towards a new approach to improve site dependent performance prediction of solar power plants is taken.