No abstract

This paper summarizes the advantageous and disadvantageous properties of alkali-activated slag cement and concrete by reviewing previously published work in English, Russian and Chinese. Practical problems and theoretical questions are discussed. Topics for future work in this field are suggested. The practical problems mentioned are quick setting, the possibility of alkali—aggregate reaction, and the occurrence of efflorescence, shrinkage, microcracks and strength variation. The theoretical questions discussed concerning alkaline activation include the roles of the alkaline anion and cation, the nature of the hydration products, microstructural development and the setting and hardening mechanisms.

When a solid is plastically deformed in a hard testing machine and the cross‐head is arrested, a continuous decrease of load is observed. An interpretation and analysis of this stress relaxation phenomenon is made. This effect can be used to study mechanisms of plastic deformation in solids, and details are given in the paper.

In backscattered electron (bse) images of polished cement sections, anhydrous material, calcium hydroxide, other hydration products (mainly C-S-H) and porosity can be distinguished on the basis of their grey level in the image. Using an image analyzer connected directly to the SEM, it is possible to resolve these four components and so measure their relative proportions and distributions. The effects of magnification and the number of fields measured on the accuracy of bse image analysis are examined. The volume fractions of anhydrous material, porosity and calcium hydroxide derived from bse image analysis are compared with those obtained by other techniques and good correlation was found for the measurement of anhydrous material and porosity.