RESUMENEste trabajo pretende contribuir al conocimiento de las reacciones de interacción entre los áridos y los componentes de la fase intersticial del hormigón y determinar si estos áridos, empleados posteriormente en la fabricación del hormigón, son reactivos y por tanto susceptibles de provocar una disminución progresiva de sus propiedades iniciales.Para la caracterización de cada árido se ha realizado un estudio petrográfico, fundamental a la hora de determinar su posterior comportamiento en términos de reactividad frente a diversos factores. Seguidamente, se ha analizado la reactividad potencial de diferentes áridos silicatados (pizarras, gneis, corneanas, granitos, cuarcita y serpentina) mediante los dos métodos normalizados existentes: el método químico para la determinación de la reactividad potencial de áridos y el método acelerado en probetas de mortero; y para contrastar ambos hemos seguido el método de la reactividad superficial.Los resultados determinan que algunos áridos son susceptibles de reaccionar con los componentes de la fase intersticial de hormigón. La observación de su textura antes y después del ataque denota la existencia de esta interacción.Palabras clave: reacción álcali-sílice, degradación, expansión, mortero, SEM. SUMMARYThe aim of this work is to contribute to the knowledge of the interactions between aggregates and the components of the interstitial phase of concrete and to determine whether those aggregates that are subsequently used in the manufacture of concrete are reagents and are therefore likely to undergo a progressive deterioration of their initial properties.An initial petrographic study of each aggregate is performed in order to be able to determine its subsequent behaviour and reactivity under the influence of various factors. The potential reactivity of different silicaceous aggregates (slates, gneiss, hornfels, granites, quartzite and serpentine) is then determined by a chemical method for evaluating the potential reactivity of aggregates and an accelerated method in mortar specimens, and finally the surface reactivity is investigated.The results of these studies suggest that some aggregates are able to react with the components of the interstitial phase of concrete. The existence of this kind of interaction is confirmed by the results of the surface investigations before and after the basic reaction.Keywords: alkali-silica reaction, degradation, expansion, mortar, SEM. INTRODUCCIÓNUna reacción álcali-silicato se produce cuando interaccionan áridos, que contienen minerales silicatados potencialmente reactivos, con los álcalis del cemento. Esta reactividad lleva consigo la formación de geles que en presencia de humedad se expanden, manifestándose en agrietamientos y movimientos diferenciales y con ello, una disminución drástica de la durabilidad (1-5) Por tanto, este proceso viene determinado en gran medida con la humedad relativa del ambiente y la tensión mecánica a la cual esta sometida cada elemento estructural (6-11).Las fases de la reacción árido-álcali se pueden...
IntroducciónEs bien conocido que los hormigones sufren agresiones que afectan en mayor o menor medida a su durabilidad. Una de estas patologías consiste en la paulatina degradación de estructuras de hormigón debido a las reacciones que se producen entre ciertos áridos silíceos y los hidróxidos alcalinos de los cementos cuando este hormigón se encuentra en ambientes de alta humedad (Stanton, 1948; Herrador et al., 2008). El resultado de esta reactividad es la aparición de geles silicocalcoalcalinos que sufren grandes aumentos de volumen, debido a su gran absorción de agua, y provocan la fisuración de los áridos y la pasta de cemento como consecuencia de las tensiones que estos geles hidratados producen (Dent Glasser & Kataoka, 1981; Fournier & Béru-bé, 2000;Menéndez & Soriano, 2007).Las presiones generadas por la expansión de los geles producto de estas reacciones dan lugar a las roturas registradas en los áridos y la pasta de cemento que los envuelve, lo que redunda en el deterioro del hormigón del que forman parte (Ichikawa & Miura, 2007).Reactividad álcali-sílice y álcali-silicato en pizarras Alkali-silica and alkali-silicate
IntroducciónLa reacción álcali-silicato es un tipo de reacción árido-alcali que se produce cuando interaccionan áridos que contienen minerales silicatados potencialmente reactivos, con los álcalis del cemento (Stanton, 1948). Esta reactividad conlleva la formación de geles que muestran una gran avidez por el agua, lo que en presencia de humedad provoca su expansión (Mather, 1999;Menéndez & Soriano, 2007), y como consecuencia de ésta agrietamientos y, en definitiva, una disminución drástica de la durabilidad (Berube, 2002;Hobbs, 1988;Chrest et al., 1994).En este trabajo se han empleado dos métodos para evaluar la reactividad potencial de áridos, el
A high-performance concrete design is presented that incorporates powdered polyester resin waste as a fine aggregate material in partial substitution of sand, with additions of both a superplasticizer based on carboxylic ethers and silica fume. The potential application of the powdered polyester resin and its properties as an aggregate are both analysed as well as the mechanical behaviour, in both the fresh and the hardened states, of the concrete. Both the flexural and the compressive strength of the concrete were shown to depend on the amount of waste used in substitution of the sand. The results of the research show that the designed concrete reaches the resistances of a high performance concrete with values above 50 MPa. On the other hand, the rest of its properties are equivalents, both in the fresh and hardened state, proportional to the amount of powdered polyester resin that is added. However, to achieve this, the use of superplasticizers additives and admixtures of silica fume is necessary.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.