the ASDEX Upgrade team, 4 and the EUROfusion MST1 team 5
We present an ultrafast neural network (NN) model, QLKNN, which predicts core tokamak transport heat and particle fluxes. QLKNN is a surrogate model based on a database of 300 million flux calculations of the quasilinear gyrokinetic transport model QuaLiKiz. The database covers a wide range of realistic tokamak core parameters. Physical features such as the existence of a critical gradient for the onset of turbulent transport were integrated into the neural network training methodology. We have coupled QLKNN to the tokamak modelling framework JINTRAC and rapid control-oriented tokamak transport solver RAPTOR. The coupled frameworks are demonstrated and validated through application to three JET shots covering a representative spread of H-mode operating space, predicting turbulent transport of energy and particles in the plasma core. JINTRAC-QLKNN and RAPTOR-QLKNN are able to accurately reproduce JINTRAC-QuaLiKiz T i,e and n e profiles, but 3 to 5 orders of magnitude faster. Simulations which take hours are reduced down to only a few tens of seconds. The discrepancy in the final source-driven predicted profiles between QLKNN and QuaLiKiz is on the order 1%-15%. Also the dynamic behaviour was well captured by QLKNN, with differences of only 4%-10% compared to JINTRAC-QuaLiKiz observed at mid-radius, for a study of density buildup following the L-H transition. Deployment of neural network surrogate models in multi-physics integrated tokamak modelling is a promising route towards enabling accurate and fast tokamak scenario optimization, Uncertainty Quantification, and control applications.
This is a repository copy of X-point radiation, its control and an ELM suppressed radiating regime at the ASDEX Upgrade tokamak.
This article presents a new theoretical model of ion collection by a cylindrical Langmuir probe at medium and higher pressures which we call the "modified TALBOT and CHOU model". The model makes use of the following theories; (a) the kinetic theory by CHOU, TALBOT and WILLIS [6, 71 and (b) the theory by ZAKRZEWSKI and KOPICZYNSKI [lo, 1 I]. The basic idea is to calculate the decrease of probe ion current due to collisions with neutrals according [6, 71 and the increase of the ion current due to destruction of an orbital motion according [lo, I I]. The computed results are presented in the form of graphs suitable for probe data interpretation at medium and higher pressures. The applicability of the results at particular plasma conditions is also discussed.
The JET 2019-2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major Neutral Beam Injection (NBI) upgrade providing record power in 2019-2020, and tested the technical & procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle physics in the coming D-T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed Shattered Pellet Injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design & operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D-T benefited from the highest D-D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER.
Integrated edge-localized-mode (ELM)-free or small ELM scenarios for the demonstration fusion power plant (DEMO) are investigated in ASDEX Upgrade using argon seeding for radiative power removal mainly in the pedestal region. An important aspect is the modification of the electron pressure in the pedestal by the additional radiative power losses. Full ELM suppression could be achieved in a no-ELM H-mode scenario featuring an edge electromagnetic quasicoherent mode up to a heating power of 5 MW, where argon radiation allowed the extension of the heating power operational space. At higher powers up to 12 MW (reaching the beta limit), ELMs of reduced size prevail and detachment is obtained by the argon seeding. Control of the position of a radiating zone localized inside the X-point was found to be favorable compared to the control of the separatrix power for low P s e p / P h e a t . Integration of pedestal cooling with Ar and ELM suppression by resonant magnetic perturbations (RMP) allowed an increase of the core radiation and a partial recovery of normalized confinement to H98 = 1. This favorable behavior is finally limited by the loss of the RMP density pump-out effect, followed by an ELM-free H-mode phase and re-occurrence of ELMs. For an active tailoring of the pedestal pressure profile, precise knowledge of the radiation profile is required. Modeling of the argon radiation profile with the STRAHL code showed good agreement with bolometry only if charge exchange of neutral deuterium with argon ions was taken into account, highlighting the importance of the neutral density in the pedestal region. In view of best integration of a no-ELM scenario with divertor detachment and high heating power, the divertor compression and enrichment of argon and neon were compared using dynamic gas puff experiments. Argon shows more than a factor of 3 higher divertor enrichment compared to neon, but the absolute values decrease with higher neutral deuterium pressure.
A cross-regime (L-mode, I-mode and H-mode) database combining scrape-off layer (SOL) power decay length λ q divertor measurements and upstream SOL electron pressure, temperature and density decay lengths has been assembled at ASDEX Upgrade. It is found that a cross-regime λ q scaling is best described by a local edge quantity, such as the edge electron pressure evaluated at ρ pol = 0.95. Furthermore, λ q exhibits a clear correlation with edge electron pressure gradient lengths, no matter if taken inside or outside the separatrix. In addition, the database reveals that SOL and pedestal electron pressure gradients are remarkably well correlated across all confinement regimes. The physical interpretation of this observation is discussed with regard to an edge pressure critical gradient paradigm governing the edge physics and to a turbulence spreading in the SOL. Moreover, it is shown that the Spitzer–Härm electron conduction regime is a reasonable approximation to estimate λ q across different confinement regimes. The main implication of these findings is that a widening of λ q is linked to a reduction of edge electron pressure gradients.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.