In this study, the production of dual phase steel structure in the core of surface carburised AISI 8620 cementation steel and the effect of martensite volume fraction on tensile properties have been investigated. For these purposes, surface carburised ( ~0. 8 wt-%C) specimens were oil quenched from 900°C to obtain a fully martensitic starting microstructure. Then specimens were oil quenched from intercritical annealing temperatures of 731 or 746°C to produce dual phase steel structure in the core of specimens with martensite fractions of ~25 or ~50 vol.-% and nearly wholly martensitic microstructure at the surface. Generally, specimens with dual phase microstructure in the core exhibited slightly lower tensile and yield strengths but superior ductility without sacri® cing surface hardness than those specimens with fully martensitic microstructure in the core produced by using conventional heat treatment involving quenching from 850 to 950°C. Also tensile strength increased and ductility decreased with increasing martensite volume fraction.MST/5119
Patlama kaynağı yöntemi ile birleştirilen östenitik paslanmaz çelik (AISI 316L)-S235JR kompozit malzemelerde patlayıcı oranının mikroyapı ve yorulma özelliklerine etkisiThe effect of explosive ratio on microstructure and fatigue properties of austenitic stainless steel (AISI 316L)-S235JR composite materials joined by explosive welding method Yazarlar (Authors): Özer PAMUK 1 , Ahmet DURGUTLU 2 , Bu makaleye şu şekilde atıfta bulunabilirsiniz(To cite to this article): Pamuk Ö., Durgutlu A., "Patlama kaynağı yöntemi ile birleştirilen östenitik paslanmaz çelik (AISI 316 L) -S235JR kompozit malzemelerde patlayıcı oranının mikroyapı ve yorulma özelliklerine etkisi", Politeknik Dergisi, 21(3): 527-534, (2018).Erişim linki (To link to this article): http://dergipark.gov.tr/politeknik/archive ÖZ Bu çalışmada, östenitik paslanmaz çelik (AISI 316L) ve S235JR levhalar, katı hal kaynak yöntemlerinden olan patlama kaynak yöntemiyle iki farklı patlayıcı oranı (R=1.5-2) kullanılarak birleştirilmiştir. Elde edilen kompozit malzemelerin birleşme arayüzeylerinde meydana gelen değişimleri görmek ve mekanik özelliklerini tespit etmek amacıyla mikroyapı, sertlik ve yorulma deneyleri gerçekleştirilmiştir. Deneyler sonucunda düşük patlayıcı oranının kullanıldığı numunelerin birleşme arayüzeyinde oluşan dalgalanmanın çok düşük boyutlarda olduğu görülmüştür. Daha yüksek patlayıcı oranının kullanıldığı numunede ise artan patlayıcı oranı ile beraber arayüzeyde oluşan dalgaların boylarında ve genliklerinde bir artış meydana geldiği tespit edilmiştir. Patlayıcı oranının artmasıyla beraber oluşan deformasyondan dolayı kompoziti meydana getiren malzemelerin sertliklerinde de bir artışın meydana geldiği belirlenmiştir. Kompozit malzemelere uygulanan yorulma deneylerinde ise patlayıcı oranının artmasıyla beraber kompozitlerin yorulma ömürlerinde bir azalmanın meydana geldiği tespit edilmiştir.Anahtar Kelimeler: Patlamalı kaynak, patlama oranı, mikroyapı, yorulma, sertlik.
ABSTRACTIn this study, austenitic stainless steel (AISI 316L) and S235JR plates were joined via explosion welding method, which is one of solid state welding methods, and by using two different explosive rates (R=1.5-2). The developed composite materials microstructure was evaluated in order to see changes occurring in the joint interfaces and the hardness, and fatigue tests were carried out to determine their mechanical properties. As a result of the experiment, the fluctuation occurring in the joint interface of samples was observed to be very low for low explosive rate, On the other hand, it was determined that in the sample in which higher explosive rate was used the lengths and amplitudes of waves increased in the joint interface. An increase was determined in hardness of materials forming the composite due to deformation occurring as a result of increase of explosive rate. In fatigue tests applied to composite materials, a decrease was found in fatigue life of composites as a result of increase of explosive rate.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.