No abstract

No abstract

Life cycle greenhouse gas (GHG) emissions associated with two major recovery and extraction processes currently utilized in Alberta's oil sands, surface mining and in situ, are quantified. Process modules are developed and integrated into a life cycle model-GHOST (GreenHouse gas emissions of current Oil Sands Technologies) developed in prior work. Recovery and extraction of bitumen through surface mining and in situ processes result in 3-9 and 9-16 g CO(2)eq/MJ bitumen, respectively; upgrading emissions are an additional 6-17 g CO(2)eq/MJ synthetic crude oil (SCO) (all results are on a HHV basis). Although a high degree of variability exists in well-to-wheel emissions due to differences in technologies employed, operating conditions, and product characteristics, the surface mining dilbit and the in situ SCO pathways have the lowest and highest emissions, 88 and 120 g CO(2)eq/MJ reformulated gasoline. Through the use of improved data obtained from operating oil sands projects, we present ranges of emissions that overlap with emissions in literature for conventional crude oil. An increased focus is recommended in policy discussions on understanding interproject variability of emissions of both oil sands and conventional crudes, as this has not been adequately represented in previous studies.

A life cycle-based model, GHOST (GreenHouse gas emissions of current Oil Sands Technologies), which quantifies emissions associated with production of diluted bitumen and synthetic crude oil (SCO) is developed. GHOST has the potential to analyze a large set of process configurations, is based on confidential oil sands project operating data, and reports ranges of resulting emissions, improvements over prior studies, which primarily included a limited set of indirect activities, utilized theoretical design data, and reported point estimates. GHOST is demonstrated through application to a major oil sands process, steam-assisted gravity drainage (SAGD). The variability in potential performance of SAGD technologies results in wide ranges of "well-to-refinery entrance gate" emissions (comprising direct and indirect emissions): 18-41 g CO(2)eq/MJ SCO, 9-18 g CO(2)eq/MJ dilbit, and 13-24 g CO(2)eq/MJ synbit. The primary contributor to SAGD's emissions is the combustion of natural gas to produce process steam, making a project's steam-to-oil ratio the most critical parameter in determining GHG performance. The demonstration (a) illustrates that a broad range of technology options, operating conditions, and resulting emissions exist among current oil sands operations, even when considering a single extraction technology, and (b) provides guidance about the feasibility of lowering SAGD project emissions.

Background, aim, and scope To minimize the environmental impacts of construction and simultaneously move closer to sustainable development in the society, the life cycle assessment of buildings is essential. This article provides an environmental life cycle assessment (LCA) of a typical commercial office building in Thailand. Almost all commercial office buildings in Thailand follow a similar structural, envelope pattern as well as usage patterns. Likewise, almost every office building in Thailand operates on electricity, which is obtained from the national grid which limits variability. Therefore, the results of the single case study building are representative of commercial office buildings in Thailand. Target audiences are architects, building construction managers and environmental policy makers who are interested in the environmental impact of buildings. Materials and methods In this work, a combination of input-output and process analysis was used in assessing the potential environmental impact associated with the system under study according to the ISO14040 methodology. The study covered the whole life cycle including material production, construction, occupation, maintenance, demolition, and disposal. The inventory data was simulated in an LCA model and the environmental impacts for each stage computed. Three environmental impact categories considered relevant to the Thailand context were evaluated, namely, global warming potential, acidification potential, and photo-oxidant formation potential. A 50-year service time was assumed for the building. ResultsThe results obtained showed that steel and concrete are the most significant materials both in terms of quantities used, and also for their associated environmental impacts at the manufacturing stage. They accounted for 24% and 47% of the global warming potential, respectively. In addition, of the total photo-oxidant formation potential, they accounted for approximately 41% and 30%; and, of the total acidification potential, 37% and 42%, respectively. Analysis also revealed that the life cycle environmental impacts of commercial buildings are dominated by the operation stage, which accounted for approximately 52% of the total global warming potential, about 66% of the total acidification potential, and about 71% of the total photo-oxidant formation potential, respectively. The results indicate that the principal contributor to the impact categories during the operation phase were emissions related to fossil fuel combustion, particularly for electricity production. Discussion The life cycle environmental impacts of commercial buildings are dominated by the operation stage, especially electricity consumption. Significant reductions in the environmental impacts of buildings at this stage can be achieved through reducing their operating energy. The results obtained show that increasing the indoor set-point temperature of the building by 2°C, as well as the practice of load shedding, reduces the environmental burdens of buildings at the operation stage. On a n...

No abstract

No abstract

In te rnationa l J o u rn al of W a s te R esource s