This paper studies beamforming techniques for energy efficiency maximization (EEmax) in multiuser multiple-input single-output (MISO) downlink system. For this challenging nonconvex problem, we first derive an optimal solution using branch-and-reduce-and-bound (BRB) approach. We also propose two low-complexity approximate designs. The first one uses the well-known zero-forcing beamforming (ZFBF) to eliminate inter-user interference so that the EEmax problem reduces to a concave-convex fractional program. Particularly, the problem is then efficiently solved by closed-form expressions in combination with the Dinkelbach's approach. In the second design, we aim at finding a stationary point using the sequential convex approximation (SCA) method. By proper transformations, we arrive at a fast converging iterative algorithm where a convex program is solved in each iteration. We further show that the problem in each iteration can also be approximated as a second-order cone program (SOCP), allowing for exploiting computationally efficient state-of-the-art SOCP solvers. Numerical experiments demonstrate that the second design converges quickly and achieves a near-optimal performance. To further increase the energy efficiency, we also consider the joint beamforming and antenna selection (JBAS) problem for which two designs are proposed. In the first approach we capitalize on the perspective reformulation in combination with continuous relaxation to solve the JBAS problem. In the second one, sparsity-inducing regularization is introduced to approximate the JBAS problem, which is then solved by the SCA method.Numerical results show that joint beamforming and antenna selection offers significant energy efficiency improvement for large numbers of transmit antennas. Index TermsMISO broadcast channel, energy efficiency, Dinkelbach method, mixed-integer programming, sequential convex approximation, second-order cone programming, fractional programming, antenna selection. 4 and mean squared error minimization [6]. Huang et al. [17] aimed at finding the Pareto boundary in MISO interference channel. Apart from the Dinkelbach's approach, [18] considered EEmax with userspecific signal-to-interference-plus-noise ratio (SINR) constraints by proposing ZFBF power allocation and zero-gradient based joint beamforming and power allocation strategy in multi-user MIMO downlink 1053-587X (c)

Abstract-We investigate the fairness of achievable energy efficiency in a multicell multiuser multiple-input single-output (MISO) downlink system, where a beamforming scheme is designed to maximize the minimum energy efficiency among all base stations. The resulting optimization problem is a nonconvex max-min fractional program, which is generally difficult to solve optimally. We propose an iterative beamformer design based on an inner approximation algorithm which aims at locating a Karush-Kuhn-Tucker solution to the nonconvex program. By novel transformations, we arrive at a convex problem at each iteration of the proposed algorithm, which is amendable for being approximated by a second order cone program. The numerical results demonstrate that the proposed algorithm outperforms the existing schemes in terms of the convergence rate and processing time.Index Terms-Energy efficiency, max-min fractional programming, inner approximation algorithm.

This paper proposes energy-efficient coordinated beamforming strategies for multi-cell multi-user multiple-input single-output system. We consider a practical power consumption model, where part of the consumed power depends on the base station or user specific data rates due to coding, decoding and backhaul. This is different from the existing approaches where the base station power consumption has been assumed to be a convex or linear function of the transmit powers. Two optimization criteria are considered, namely network energy efficiency maximization and weighted sum energy efficiency maximization. We develop successive convex approximation based algorithms to tackle these difficult nonconvex problems. We further propose decentralized implementations for the considered problems, in which base stations perform parallel and distributed computation based on local channel state information and limited backhaul information exchange. The decentralized approaches admit closed-form solutions and can be implemented without invoking a generic external convex solver. We also show an example of the pilot contamination effect on the energy efficiency using a heuristic pilot allocation strategy. The numerical results are provided to demonstrate that the rate dependent power consumption has a large impact on the system energy efficiency, and, thus, has to be taken into account when devising energy-efficient transmission strategies. The significant gains of the proposed algorithms over the conventional low-complexity beamforming algorithms are also illustrated.

This paper studies the energy efficiency and sum rate trade-off for coordinated beamforming in multi-cell multiuser multigroup multicast multiple-input single-output systems. We first consider a conventional network energy efficiency maximization (EEmax) problem by jointly optimizing the transmit beamformers and antennas selected to be used in transmission. We also account for per-antenna maximum power constraints to avoid non-linear distortion in power amplifiers and user-specific minimum rate constraints to guarantee certain service levels and fairness. To be energy-efficient, transmit antenna selection is employed. It eventually leads to a mixed-Boolean fractional program. We then propose two different approaches to solve this difficult problem. The first solution is based on a novel modeling technique that produces a tight continuous relaxation. The second approach is based on sparsity-inducing method, which does not require the introduction of any Boolean variable. We also investigate the trade-off between the energy efficiency and sum rate by proposing two different formulations. In the first formulation, we propose a new metric that is the ratio of the sum rate and the so-called weighted power. Specifically, this metric reduces to EEmax when the weight is 1, and to sum rate maximization when the weight is 0. In the other method, we treat the trade-off problem as a multi-objective optimization for which a scalarization approach is adopted. Numerical results illustrate significant achievable energy efficiency gains over the method where the antenna selection is not employed. The effect of antenna selection on the energy efficiency and sum rate trade-off is also demonstrated.

Abstract-This paper considers coordinated multicast beamforming in a multi-cell multigroup multiple-input single-output system. Each base station (BS) serves multiple groups of users by forming a single beam with common information per group. We propose centralized and distributed beamforming algorithms for two different optimization targets. The first objective is to minimize the total transmission power of all the BSs while guaranteeing the user-specific minimum quality-of-service targets. The semidefinite relaxation (SDR) method is used to approximate the non-convex multicast problem as a semidefinite program (SDP), which is solvable via centralized processing. Subsequently, two alternative distributed methods are proposed. The first approach turns the SDP into a two-level optimization via primal decomposition. At the higher level, inter-cell interference powers are optimized for fixed beamformers while the lower level locally optimizes the beamformers by minimizing BS-specific transmit powers for the given inter-cell interference constraints. The second distributed solution is enabled via an alternating direction method of multipliers, where the inter-cell interference optimization is divided into a local and a global optimization by forcing the equality via consistency constraints. We further propose a centralized and a simple distributed beamforming design for the signal-to-interference-plus-noise ratio (SINR) balancing problem in which the minimum SINR among the users is maximized with given per-BS power constraints. This problem is solved via the bisection method as a series of SDP feasibility problems. The simulation results show the superiority of the proposed coordinated beamforming algorithms over traditional non-coordinated transmission schemes, and illustrate the fast convergence of the distributed methods.