Pump-to-wheels (PTW) methane emissions from the heavy-duty (HD) transportation sector, which have climate change implications, are poorly documented. In this study, methane emissions from HD natural gas fueled vehicles and the compressed natural gas (CNG) and liquefied natural gas (LNG) fueling stations that serve them were characterized. A novel measurement system was developed to quantify methane leaks and losses. Engine related emissions were characterized from twenty-two natural gas fueled transit buses, refuse trucks, and over-the-road (OTR) tractors. Losses from six LNG and eight CNG stations were characterized during compression, fuel delivery, storage, and from leaks. Cryogenic boil-off pressure rise and pressure control venting from LNG storage tanks were characterized using theoretical and empirical modeling. Field and laboratory observations of LNG storage tanks were used for model development and evaluation. PTW emissions were combined with a specific scenario to view emissions as a percent of throughput. Vehicle tailpipe and crankcase emissions were the highest sources of methane. Data from this research are being applied by the authors to develop models to forecast methane emissions from the future HD transportation sector.

A conceptually laminar mechanism of extremely fast flame acceleration in obstructed channels, identified by Bychkov et al. [“Physical mechanism of ultrafast flame acceleration,” Phys. Rev. Lett. 101, 164501 (2008)], is further studied by means of analytical endeavors and computational simulations of compressible hydrodynamic and combustion equations. Specifically, it is shown how the obstacles length, distance between the obstacles, channel width, and thermal boundary conditions at the walls modify flame propagation through a comb-shaped array of parallel thin obstacles. Adiabatic and isothermal (cold and preheated) side walls are considered, obtaining minor difference between these cases, which opposes the unobstructed channel case, where adiabatic and isothermal walls provide qualitatively different regimes of flame propagation. Variations of the obstructed channel width also provide a minor influence on flame propagation, justifying a scale-invariant nature of this acceleration mechanism. In contrast, the spacing between obstacles has a significant role, although it is weaker than that of the blockage ratio (defined as the fraction of the channel blocked by obstacles), which is the key parameter of the problem. Evolution of the burning velocity and the dependence of the flame acceleration rate on the blockage ratio are quantified. The critical blockage ratio, providing the limitations for the acceleration mechanism in channels with comb-shaped obstacles array, is found analytically and numerically, with good agreement between both approaches. Additionally, this comb-shaped obstacles-driven acceleration is compared to finger flame acceleration and to that produced by wall friction.

No abstract

No abstract