A pilot free-release monitoring post with a 600 L container monitor was developed and metrological tested within the 2nd stage of NPP A1 decommissioning project. In order to reduce the volume of contaminated soil monitoring a conceptual design of fast sorting loader shovel monitor (loader’s spoon) was proposed and tested within the project as well. The free-release monitoring post makes use of a pair of electrically cooled lead shielded semiconductor detectors placed into a mounting rack ensuring measurements in either horizontal (container monitoring) or vertical (drum monitoring) counting geometry. For evaluation of measured HPGe spectra the Canberra – Packard ISOCS detection efficiency calculation code was used. A loader is used to change the measured side of the 600 L container. For metrological certification of this monitor a special prototype test container with 24 rod sources inside a regular grid was necessary to design and to use. The mentioned above vertical counting geometry together with an additional drum rotator ensures standard free release monitoring of materials in 200 l rotating drums. Successful metrological qualification of the both counting geometries at SMU Bratislava showed 20% accuracy class. A pair of NaI(Tl) detectors and a measurement and navigation frame ensuring loader shovel fixation in counting position are used for the fast sorting monitoring. The navigation of loader and its shovel to the counting geometry should be as fast as possible. The monitored results shall be indicated by a prompt light indication system (apart from storing on HDD). MCNP 5 calculation code was used for assessment of gross gamma 137Cs detection efficiency. The estimated MDA for a pair of 2″ × 2″ Na(Tl) detectors and 30 s acquisition time is about 90 Bq/kg. However, due to the counting geometry deviations from calculated values the uncertainty of measurements can be relatively high. Hence, the system is applicable for sorting monitoring only.
New free release monitoring post with a large volume 600 L container counting geometry was designed and developed. The monitoring system is able to monitor a material also in standard counting geometry of 200 L drum. Using counting geometry of 600 L rectangular container that is equipped with self-discharger is able to increase the total monitoring capacity. The monitoring system is based on a pair of electrically cooled semiconductor HPGe detectors that are placed into a modifiable vertical or horizontal pair of lead collimators. The monitoring system is integrated with an industrial scale for determination of massic activities of measured materials and in addition by a rotating table in the case of 200 L drums monitoring. Monitoring system is integrated into transportable ISO container with constant environmental conditions that are ensured by air-condition unit. Full-energy peak detection efficiency (FPE) polynomial curves for various densities of measured material were in both cases determined by ISOCS calibration code based on designed counting geometry and delivered ISOCS/LabSOCS detector characterization. Uncertainty analysis of massic activity measurement by container and drum monitoring system in designed counting geometry is introduced below in more detail.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.