The utilization of three-dimensional printing in a simulation-based congenital heart disease and critical care training curriculum is feasible and improves pediatric resident physicians' understanding of a common congenital heart abnormality.

Congenital heart diseases causing significant hemodynamic and functional consequences require surgical repair. Understanding of the precise surgical anatomy is often challenging and can be inadequate or wrong. Modern high resolution imaging techniques and 3D printing technology allow 3D printing of the replicas of the patient’s heart for precise understanding of the complex anatomy, hands-on simulation of surgical and interventional procedures, and morphology teaching of the medical professionals and patients. CT or MR images obtained with ECG-gating and breath-holding or respiration navigation are best suited for 3D printing. 3D echocardiograms are not ideal but can be used for printing limited areas of interest such as cardiac valves and ventricular septum. Although the print materials still require optimization for representation of cardiovascular tissues and valves, the surgeons find the models suitable for practicing closure of the septal defects, application of the baffles within the ventricles, reconstructing the aortic arch, and arterial switch procedure. Hands-on surgical training (HOST) on models may soon become a mandatory component of congenital heart disease surgery program. 3D printing will expand its utilization with further improvement of the use of echocardiographic data and image fusion algorithm across multiple imaging modalities and development of new printing materials. Bioprinting of implants such as stents, patches and artificial valves and tissue engineering of a part of or whole heart using the patient’s own cells will open the door to a new era of personalized medicine.

It is feasible to use present-day 3D printing technology to create high-fidelity heart models with complex intracardiac defects. Furthermore, this tool forms the foundation for an innovative, simulation-based educational approach to teach students about CHD and creates a novel opportunity to stimulate their interest in this field.

No abstract

Transcatheter creation and enlargement of interatrial defects (IAD) may improve hemodynamics; however, procedural outcomes have not been well defined. Hospital records were reviewed for children who underwent percutaneous procedures to create and enlarge an IAD and were grouped as follows: (1) right and (2) left heart obstructive lesions, (3) left atrial (LA) decompression during left heart assist, (4) failing Fontan circulation, and (5) miscellaneous. Forty-five children (mean age, 3.4 +/- 4.7 years; 30 (67%) male) were identified. In group 1 (n = 6), all achieved endpoints of right atrial (RA) decompression (n = 2), improved left ventricular filling (n = 3), or improved arterial saturations (n = 1). In group 2 (n = 18), mean LA pressure decreased (21 +/- 6 to 13 +/- 5 mmHg, p < 0.001) and arterial saturations increased (61 +/- 13% to 78 +/- 11%, p < 0.001). All except 2 patients achieved definitive repair, further palliation (n = 9), or heart transplantation (HTX) (n = 7). In group 3 (n = 5), the LA was decompressed (21 to 13 mmHg, p = 0.03) in all, and all except 1 patient survived to HTX (n = 2) or full recovery (n = 2). In group 4 (n = 11), of 7 patients with a low cardiac output syndrome after surgery, despite improved atrial shunting, 3 died and 1 required a HTX. In group 5 (n = 5), RA decompression (n = 1) or improved arterial saturation (n = 4) was achieved in all. Overall, 5-year HTX free survival was 75%. Mechanical ventilation before the procedure (p < 0.001), the need for a blade septostomy (p = 0.002), and higher LA pressures after the procedure (p = 0.04) independently predicted mortality or the requirement for HTX. Transcatheter optimization of an atrial communication can help optimize treatment strategies and has a low procedural risk.

Rapid 3D-Prototyping is an established technique that converts digital image data of any 3D structure to a physical 3D model. It has been used for a long time in industry for making prototypes of any new products. The state-of-the-art medical imaging facilities such as computed tomography and magnetic resonance imaging (and possibly echocardiography in the future) provide precise digital information of the cardiovascular structures of the human body. The digital information can be used for production of multiple replicas of the human body parts with solid or flexible materials. Virtual visualization of 3D information in the computer screen has revolutionized medical imaging in the last 10-20 years. Although virtual visualization facilitates understanding, it does not allow direct contact or manipulation on the physical model. 3D prototyping of the replicas certainly allows direct visual access to the physical structures and more importantly direct physical manipulation such as practice surgery on the replica of the structure to be operated. The models are excellent teaching materials to all involved in cardiac imaging or surgery. Production of 3D prototypes of various pathologic conditions is even more important as there has been increasing restrictions to keeping human body parts for teaching as well as clinical purposes and pathologic specimens are available only when they are removed at surgery or at autopsy.

No abstract