TiO 2-Fe 3 O 4-Bentonite photocatalytic material has been developed to inactivate of Escherichia coli. The syntheses of the TiO 2-Fe 3 O 4 based photocatalyst have been carried out by sol-gel method. The bentonite used for porous support was obtained from Pacitan, Indonesia. The photocatalyst material will capture energy of UV radiation followed by the electron excitation and oxidationreduction reactions. Because of the processes, the various types of pollutants and microorganisms can be decomposed and reduced. The electron excitation will induce the formation of hydroxyl radical and O 2. These radicals are responsible to decompose the cell wall of bacteria and further damage the bacteria's cytoplasmic membrane. Decomposing of cytoplasmic membrane causes lipid peroxidation in the membrane, and then losing their viability. It is followed by the death of bacterial cell. This study conducted a series of Escherichia coli inactivation by using photocatalyst material of TiO2-Fe 3 O 4-Bentonite which was irradiated with UV light. The photocatalytic inactivation of Escherichia coli was conducted in a reactor under ultraviolet (325 nm) exposing. The photocatalytic degradation was observed for 5 hours to determine the optimum initial bacteria concentration, intensity of UV light and also photocatalyst concentration. The inactivation kinetic was approached by Chick-Watson and Hom kinetic models. The colonies calculations were conducted by Total Plate Count. The optimum condition was achieved for 300 minutes process to reach 7 bacterial log reduction units for an average bacterial inoculum size of 3.8 × 10 4 CFU/ml. All disinfection experiments showed a non-linear bacterial inactivation kinetic profile, which is started with shoulder lag followed by a log reduction and the tailing curve. The inactivation kinetics of Escherichia coli using TiO 2-Fe 3 O 4-Bentonite photocatalytic material system satisfactorily obeyed the Hom kinetic model.
TiO 2-Fe 3 O 4-Bentonite photocatalytic material has been developed to inactivate of Escherichia coli. The syntheses of the TiO 2-Fe 3 O 4 based photocatalyst have been carried out by sol-gel method. The bentonite used for porous support was obtained from Pacitan, Indonesia. The photocatalyst material will capture energy of UV radiation followed by the electron excitation and oxidationreduction reactions. Because of the processes, the various types of pollutants and microorganisms can be decomposed and reduced. The electron excitation will induce the formation of hydroxyl radical and O 2. These radicals are responsible to decompose the cell wall of bacteria and further damage the bacteria's cytoplasmic membrane. Decomposing of cytoplasmic membrane causes lipid peroxidation in the membrane, and then losing their viability. It is followed by the death of bacterial cell. This study conducted a series of Escherichia coli inactivation by using photocatalyst material of TiO2-Fe 3 O 4-Bentonite which was irradiated with UV light. The photocatalytic inactivation of Escherichia coli was conducted in a reactor under ultraviolet (325 nm) exposing. The photocatalytic degradation was observed for 5 hours to determine the optimum initial bacteria concentration, intensity of UV light and also photocatalyst concentration. The inactivation kinetic was approached by Chick-Watson and Hom kinetic models. The colonies calculations were conducted by Total Plate Count. The optimum condition was achieved for 300 minutes process to reach 7 bacterial log reduction units for an average bacterial inoculum size of 3.8 × 10 4 CFU/ml. All disinfection experiments showed a non-linear bacterial inactivation kinetic profile, which is started with shoulder lag followed by a log reduction and the tailing curve. The inactivation kinetics of Escherichia coli using TiO 2-Fe 3 O 4-Bentonite photocatalytic material system satisfactorily obeyed the Hom kinetic model.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.