OperandoNa solid-state NMR and pair distribution function analysis experiments provide insights into the structure of hard carbon anodes in sodium-ion batteries. Capacity results from "diamagnetic" sodium ions first adsorbing onto pore surfaces, defects and between expanded layers, before pooling into larger quasi-metallic clusters/expanded carbon sheets at lower voltages.

Improving electrochemical energy storage is one of the major issues of our time. The search for new battery materials together with the drive to improve performance and lower cost of existing and new batteries is not without its challenges. Success in these matters is undoubtedly based on first understanding the underlying chemistries of the materials and the relations between the components involved. A combined application of experimental and theoretical techniques has proven to be a powerful strategy to gain insights into many of the questions that arise from the "how do batteries work and why do they fail" challenge. In this Review, we highlight the application of solid-state nuclear magnetic resonance (NMR) spectroscopy in battery research: a technique that can be extremely powerful in characterizing local structures in battery materials, even in highly disordered systems. An introduction on electrochemical energy storage illustrates the research aims and prospective approaches to reach these. We particularly address "NMR in battery research" by giving a brief introduction to electrochemical techniques and applications as well as background information on both in and ex situ solid-state NMR spectroscopy. We will try to answer the question "Is NMR suitable and how can it help me to solve my problem?" by shortly reviewing some of our recent research on electrodes, microstructure formation, electrolytes and interfaces, in which the application of NMR was helpful. Finally, we share hands-on experience directly from the lab bench to answer the fundamental question "Where and how should I start?" to help guide a researcher's way through the manifold possible approaches.

Solid electrolytes that are chemically stable and have a high ionic conductivity would dramatically enhance the safety and operating lifespan of rechargeable lithium batteries. Here, we apply a multi-technique approach to the Li-ion conducting system (1-z)Li4SiO4-(z)Li3PO4 with the aim of developing a solid electrolyte with enhanced ionic conductivity. Previously unidentified superstructure and immiscibility features in high-purity samples are characterized by X-ray and neutron diffraction across a range of compositions (z = 0.0-1.0). Ionic conductivities from AC impedance measurements and large-scale molecular dynamics (MD) simulations are in good agreement, showing very low values in the parent phases (Li4SiO4 and Li3PO4) but orders of magnitude higher conductivities (10(-3) S/cm at 573 K) in the mixed compositions. The MD simulations reveal new mechanistic insights into the mixed Si/P compositions in which Li-ion conduction occurs through 3D pathways and a cooperative interstitial mechanism; such correlated motion is a key factor in promoting high ionic conductivity. Solid-state (6)Li, (7)Li, and (31)P NMR experiments reveal enhanced local Li-ion dynamics and atomic disorder in the solid solutions, which are correlated to the ionic diffusivity. These unique insights will be valuable in developing strategies to optimize the ionic conductivity in this system and to identify next-generation solid electrolytes.

The importance of exploring new solid electrolytes for all-solid-state batteries has led to significant interest in NASICON-type materials. Here, the Sc3+-substituted NASICON compositions Na3Sc x Zr2–x (SiO4)2–x (PO4)1+x (termed N3) and Na2Sc y Zr2–y (SiO4)1–y (PO4)2+y (termed N2) (x, y = 0–1) are studied as model Na+-ion conducting electrolytes for solid-state batteries. The influence of Sc3+ substitution on the crystal structures and local atomic environments has been characterized by powder X-ray diffraction (XRD) and neutron powder diffraction (NPD), as well as solid-state 23Na, 31P, and 29Si nuclear magnetic resonance (NMR) spectroscopy. A phase transition between 295 and 473 K from monoclinic C2/c to rhombohedral R3̅c is observed for the N3 compositions, while N2 compositions crystallize in a rhombohedral R3̅c unit cell in this temperature range. Alternating current (AC) impedance spectroscopy, molecular dynamics (MD), and high temperature 23Na NMR studies are in good agreement, showing that, with a higher Sc3+ concentration, the ionic conductivity (of about 10–4 S/cm at 473 K) decreases and the activation energy for ion diffusion increases. 23Na NMR experiments indicate that the nature of the Na+-ion motion is two-dimensional on the local atomic scale of NMR although the long-range diffusion pathways are three-dimensional. In addition, a combination of MD, bond valence, maximum entropy/Rietveld, and van Hove correlation methods has been used to reveal that the Na+-ion diffusion in these NASICON materials is three-dimensional and that there is a continuous exchange of sodium ions between Na(1) and Na(2) sites.

Machine-learning and DFT modelling, linked to experimental knowledge, yield new insight into the structures and reactivity of carbonaceous energy materials.

Silicon monoxide is a promising alternative anode material due to its much higher capacity than graphite, and improved cyclability over other Si anodes. An in-depth analysis of the lithium silicide (Li x Si) phases that form during lithiation/delithiation of SiO is presented here and the results are compared with pure-Si anodes. A series of anode materials is first prepared by heating amorphous silicon monoxide (a-SiO) at different temperatures, X-ray diffraction and 29 Si NMR analysis revealing that they comprise small Si domains that are surrounded by amorphous SiO 2 , the domain size and crystallinity growing with heat treatment. In and ex situ 7 Li and 29 Si solid-state NMR combined with detailed electrochemical analysis reveals that a characteristic metallic Li x Si phase is formed on lithiating a-SiO with a relatively high Li concentration of x = 3.4-3.5, which is formed/decomposed through a continuous structural evolution involving amorphous phases differing in their degree of Si-Si connectivity. This structural evolution differs from that of pure-Si electrodes where the end member, crystalline Li 15 Si 4 , is formed/decomposed through a two-phase reaction. The reaction pathway of SiO depends, however, on the size of the ordered Si domains within the pristine material. When crystalline domains of 5 nm within a SiO 2 matrix are present, a phase resembling Li 15 Si 4 forms, albeit at a higher overpotential. The continuous formation/decomposition of amorphous Li x Si phases without the hysteresis and phase change associated with the formation of c-Li 15 Si 4 , along with a partially electrochemically active SiO 2 /lithium silicate buffer layer, are paramount for the good cyclability of a-SiO.

The alloying mechanism of high-capacity tin anodes for sodium-ion batteries is investigated using a combined theoretical and experimental approach. Ab initio random structure searching (AIRSS) and high-throughput screening using a species-swap method provide insights into a range of possible sodium-tin structures. These structures are linked to experiments using both average and local structure probes in the form of operando pair distribution function analysis, X-ray diffraction, and Na solid-state nuclear magnetic resonance (ssNMR), along with ex situSn ssNMR. Through this approach, we propose structures for the previously unidentified crystalline and amorphous intermediates. The first electrochemical process of sodium insertion into tin results in the conversion of crystalline tin into a layered structure consisting of mixed Na/Sn occupancy sites intercalated between planar hexagonal layers of Sn atoms (approximate stoichiometry NaSn). Following this, NaSn, which is predicted to be thermodynamically stable by AIRSS, forms; this contains hexagonal layers closely related to NaSn, but has no tin atoms between the layers. NaSn is broken down into an amorphous phase of approximate composition NaSn. Reverse Monte Carlo refinements of an ab initio molecular dynamics model of this phase show that the predominant tin connectivity is chains. Further reaction with sodium results in the formation of structures containing Sn-Sn dumbbells, which interconvert through a solid-solution mechanism. These structures are based upon NaSn, with increasing occupancy of one of its sodium sites commensurate with the amount of sodium added. ssNMR results indicate that the final product, NaSn, can store additional sodium atoms as an off-stoichiometry compound (NaSn) in a manner similar to LiSi.

We have developed and explored the use of a new Automatic Tuning Matching Cycler (ATMC) in situ NMR probe system to track the formation of intermediate phases and investigate electrolyte decomposition during electrochemical cycling of Li- and Na-ion batteries (LIBs and NIBs). The new approach addresses many of the issues arising during in situ NMR, e.g., significantly different shifts of the multi-component samples, changing sample conditions (such as the magnetic susceptibility and conductivity) during cycling, signal broadening due to paramagnetism as well as interferences between the NMR and external cycler circuit that might impair the experiments. We provide practical insight into how to conduct ATMC in situ NMR experiments and discuss applications of the methodology to LiFePO4 (LFP) and Na3V2(PO4)2F3 cathodes as well as Na metal anodes. Automatic frequency sweep (7)Li in situ NMR reveals significant changes of the strongly paramagnetic broadened LFP line shape in agreement with the structural changes due to delithiation. Additionally, (31)P in situ NMR shows a full separation of the electrolyte and cathode NMR signals and is a key feature for a deeper understanding of the processes occurring during charge/discharge on the local atomic scale of NMR. (31)P in situ NMR with "on-the-fly" re-calibrated, varying carrier frequencies on Na3V2(PO4)2F3 as a cathode in a NIB enabled the detection of different P signals within a huge frequency range of 4000 ppm. The experiments show a significant shift and changes in the number as well as intensities of (31)P signals during desodiation/sodiation of the cathode. The in situ experiments reveal changes of local P environments that in part have not been seen in ex situ NMR investigations. Furthermore, we applied ATMC (23)Na in situ NMR on symmetrical Na-Na cells during galvanostatic plating. An automatic adjustment of the NMR carrier frequency during the in situ experiment ensured on-resonance conditions for the Na metal and electrolyte peak, respectively. Thus, interleaved measurements with different optimal NMR set-ups for the metal and electrolyte, respectively, became possible. This allowed the formation of different Na metal species as well as a quantification of electrolyte consumption during the electrochemical experiment to be monitored. The new approach is likely to benefit a further understanding of Na-ion battery chemistries.