Nitrous oxide (N2O), produced from several human activities, is considered a greenhouse gas with significant environmental impacts. The most promising abatement technology consists of the catalytic decomposition of N2O into nitrogen and oxygen. Many recently published papers dealing with N2O catalytic decomposition over Ni-substituted Co3O4 are related to the treatment of N2O concentrations less than 2 vol% in the feed stream. The present work is focused on developing catalysts active in the presence of a gaseous stream richer in N2O, up to 20 vol%, both as powder and in structured configurations suitable for industrial application. With this aim, different nickel-cobalt mixed oxides (NixCo1−xCo2O4) were prepared, characterized, and tested. Subsequently, since alumina-based slurries assure successful deposition of the catalytic species on the structured carrier, a screening was performed on three nickel-cobalt-alumina mixed oxides. As the latter samples turned out to be excellent catalysts for the N2O decomposition reaction, the final catalytic formulation was transferred to a silicon carbide monolith. The structured catalyst led to the following very promising results: total N2O conversion and selectivity towards N2 and O2 were reached at 510 °C by feeding 20 vol% of N2O. It represents an important achievement in the view of developing a more concretely applicable catalytic system for industrial processes.

Nitrous oxide (N2O) is considered the primary source of NOx in the atmosphere, and among several abatement processes, catalytic decomposition is the most promising. The thermal energy necessary for this reaction is generally provided from the external side of the reactor by burning fossil fuels. In the present work, in order to overcome the limits related to greenhouse gas emissions, high heat transfer resistance, and energy losses, a microwave-assisted N2O decomposition was studied, taking advantages of the microwave’s (MW) properties of assuring direct and selective heating. To this end, two microwave-susceptible silicon carbide (SiC) monoliths were layered with different nickel–cobalt–aluminum mixed oxides. Based on the results of several characterization analyses (SEM/EDX, BET, ultrasound washcoat adherence tests, Hg penetration technique, and TPR), the sample showing the most suitable characteristics for this process was reproduced in the appropriate size to perform specific MW-assisted catalytic activity tests. The results demonstrated that, by coupling this catalytic system with an opportunely designed microwave heated reactor, it is possible to reach total N2O conversion and selectivity of a highly concentrated N2O stream (50 vol%) at T = 550 °C, the same required in the conventionally heated process to remove N2O from a less concentrated gas stream (20 vol%).