The proposed calculation of the amount of adhesive composition, to envelop the W-like spine of the book blocks takes into account their geometric features and creates conditions for minimizing the glue spread in the technological process.
Запропоновано метод експериментального пошуку оптимального співвідношення товщини Ш-подібного клейового шару корінцевої частини книжкового блоку зшитого нитками, та необхідних і достатніх зусиль що прикладаються для його перегинань в процесі розкривання блоку.Залежність прикладених зусиль до розкривання блоку в сторінковій або стохастичній послідовності, а також місце перегинання корінцевої клейової пластини, впливають на тривалість використання книги до початку незворотних руйнівних процесів. Показано, що збільшення товщини клейового шару призводить до збільшення зусиль, направлених на подолання пружних властивостей полімерних пластин, отриманих після полімеризації нанесеного клею, зі сторони вигнутої зовнішньої поверхні корінця блоку. А також, до збільшення поверхневого натягу ввігнутої поверхні клейового шару, що знаходиться в безпосередньому контакті з імплантованими в структуру клею швейними нитками і папером корінцевих фальців книжкових зошитів. Збільшення поверхневого натягу призводить до зменшення показників відносного видовження клейового шару, яке негативно впливає на утворення природніх кутів розкривання книжкових блоків і вимагає прикладання додаткових зусиль для експлуатаційного використання книги. Виявлено, що розташування точок прикладання зусиль для перегинання корінцевої клейової пластини, в зонах обмежених кутами обхвату і в дельтовидних ділянках між зошитового простору, впливає на величину прикладених зусиль. Представлений опис пружно-пластичного стану Ш-подібної корінцевої частини книжкового блоку у вигляді розробленого алгоритму етапів впливу товщини клейового шару на деформацію корінцевої частини. Отримані залежності зміни кутів обхвату і дотичних кутів клейового шару, на етапах дискретної зміни його товщини, представлені у вигляді взаємо залежних графічних кривих в загальній системі координат. Результати виявленого співвідношення товщини Ш-подібного клейового шару та змін кутів обхвату і дотичних кутів сприяли розробленню нових нормативів кількісного використання клеюКлючові слова: кути обхвату, дотичні кути, профільне нанесення клейової композиції, Ш-подібний корінець UDC 686.1.
The object of research is preprint processes for the manufacture of audiobooks. The analytical and experimental studies reported here are based on the application of the methodology for devising a simulation model for calculating the complexity of preprint processes in the production of printed books with sound applications. The basic assumption of the study is that the use of simulation will contribute to the improvement of calculations of the complexity of preprint processes for making audiobooks. This cannot be achieved without analyzing the factors influencing the convenience of perception of textual and sound information and establishing the objective function of mutual influence of the text of the publication and audio. A methodology has been proposed for calculating the complexity of the preprint process of making audiobooks based on the developed algorithm of the technological process, mathematical representation of the structural model, as well as its components. It is shown that the process of creating audio accompaniment is affected by the content of printed pages, font design parameters, the selected format of page assembly, and the presence of illustrations. Based on the obtained expert assessments, a hierarchical representation of factors influencing the convenience of information perception is built; the interaction of parameters at different technological stages is described. The dependence of the complexity of the process of making audiobooks on the volume of the book edition in the accounting and publishing sheets, the size and capacity of the font, as well as the speed of sound recording of the printed text, has been established. It is determined that with an increase in font capacity within 200...1000 thousand characters, the calculated labor intensity increases by 5 % to 20 %. The largest limits of changes in the complexity of creating an audio accompaniment are 9 %, at the stage of processing graphic information – 50 %
Завдяки проведеним дослідженням впливу зміни товщини клейового шару на зміну площини перерізів дельтоподібних ділянок корінцевої частини книжкових бло ків, зшитих нитками, встановлено, що у процесі розкривання книги докладені зу силля, які впливають на деформацію Шподібної клейової пластини, залежать від місця перегинання пластини і призводять до незворотних руйнівних процесів. До ведено, що збільшення товщини клейового шару призводить до збільшення зу силь, спрямованих на подолання пружних властивостей полімерних пластин, от риманих після полімеризації нанесеного клею, і які докладаються з різною інтен сив ністю, що залежить від геометричної неоднорідності перерізу Шподібної плас тини. Експериментальними дослідженнями підтверджено, що розташуван ня точок докладання зусиль для розкривання книжкового блока і перегинання ко рін цевої клейової пластини супроводжує неоднорідність деформації півкруглих і дельтоподібних ділянок. Це дає змогу стверджувати, що отримані дані впливу та непропорційних відхилень зміни товщини клейового шару і площі перерізу дель то подібних ділянок найбільш наочно спостерігаються в міжзошитовому прос торі. Ключові слова: клейова композиція, дельтоподібний переріз, профільний вал, точки докладання зусиль. Постановка проблеми. У переліку технологічних процесів виготовлення книж кової продукції одним із найбільш важливих є процес скріплення корінцевої час тини. У разі незшивного клейового скріплення-це фрезерування фальців зоши тів, підібраних у блок, каширування отриманої після фрезерування поверхні і нанесення полімерної клейової композиції. Для іншого випадку підібрані в книжковий блок зошити, зшиті нитками, обтискаються, на Ш-подібну корінцеву по верхню наноситься шар клею і приклеюється окантовувальна стрічка. Нане сен ня клею здійснюється переважно за один прохід, і товщина регулюється з огляду на з'єднувальні властивості нанесених клеїв. Ефективне поєднання фізико-хімічних властивостей сучасних полімерних композицій та паперу книжкових бло ків за без печують належне змочування та вбирання в процесі клейового скріплення корінцевої Стаття надійшла до редакції 12.05.2020.
Об'єктом дослідження є процеси отримання модифікованих клейових композицій, на основі PVA (полівініл-ацетатних) дисперсій, для використання в технологічних процесах виготовлення напівжорстких книжково-журнальних обкладинок. Проведені експериментальні дослідження ґрунтуються на застосуванні порівняльної методики визначення розривної міцності склеєних, без зсуву, зразків палітурних матеріалів, за допомогою модифікованих клейових композицій та тотожних композицій без модифікування. Основне припущення дослідження полягає в тому, що використання полімерних згущувачів і емульгаторів, сумісних з PVA латексами, які активно використовуються в технологічних процесах папероробної та поліграфічної галузей, сприятимуть утворенню додаткової міцності напівжорстких обкладинок. Цього не можливо досягнути без аналізу та обирання можливих компонентів, з врахуванням механічних властивостей, що виникають після застосування таких модифікаторів, які суттєво залежать від адгезійної міцності між матеріалом зовнішньої частини обкладинки та клейовою сполучною. Запропоновано для експериментального дослідження використання речовин з високими адгезійними властивостями до щільних крейдованих паперів і тонких палітурних картонів, із яких виготовляють напівжорсткі книжково-журнальні обкладинки. Визначені структурні особливості клейових плівок, отриманих з полі-вініл-ацетатного латексу, які мають поліпшену гнучкість, пружність, високу адгезію та водостійкість в тому випадку, коли до них додані водорозчинні модифікатори. Забезпечено експериментальне визначення можливостей підвищення структурної міцності напівжорстких книжково-журнальних обкладинок, після склеювання модифікованими палітурними клеями, що суттєво не збільшують товщину клейового шару та не змінюють контурну геометрію виготовлених обкладинок. Доведено, що клейові суміші, використані для модифікування PVA дисперсії, не вплинули на структурну однорідність склеєної просторової конструкції напівжорстких обкладинок, і не вплинули на появу зовнішніх дефектів у вигляді площинної неоднорідності, або точкових потовщень поверхні обкладинок. Отримані результати досліджень склеювання конструктивних деталей розгорток напівжорстких обкладинок модифікованими клейовими композиціями створюють додаткові можливості в плануванні використання витратних матеріалів, при виготовленні обкладинок, для отримання показників міцності, за попередньо визначеними розмірними умовами застосування речовин-модифікаторів. Експериментальні дослідження показали дискретність-зростання, падіння розмірних показників міцності напівжорстких обкладинок, склеєних модифікованими клейовими композиціями, що сприяє практичному застосуванню отриманих результатів, як в плануванні технологічних процесів, так і в розрахунках собівартості книжкової продукції. Ключові слова: ПВА (полі-вініл-ацетатні) дисперсії, напівжорсткі обкладинки, клейові композиції, показники міцності.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.