Real-time hybrid method is an economical and efficient test method to evaluate the dynamic behavior. The purpose of this study is to develop the computational algorithm and to prove the reliability of a real-time hybrid control system. For performing the multi-direction dynamic test, three dynamic actuators and the optimized real-time hybrid system with new hybrid simulation program (FEAPH) and a simplified inter-communication were optimized. To verify the reliability and applicability of the real-time hybrid control system, 3-DOF (3 Degrees of Freedom) non-linear dynamic tests with physical model were conducted on a steel and concrete frame structure. As a ground acceleration, El Centro and Northridge earthquake waves were applied. As a result, the maximum error of numerical analysis is 13% compared with the result of shaking table test. However, the result of real-time hybrid test shows good agreement with the shaking table test. The real-time hybrid test using FEAPH can make good progress on the total testing time and errors. Therefore, this test method using FEAPH can be effectively and cheaply used to evaluate the dynamic performance of the full-scale structure, instead of shaking table and full-scale test.
The hybrid test is one of the most advanced test methods to predict the structural dynamic behavior with the interaction between a physical substructure and a numerical modeling in the hybrid control system. The purpose of this study is to perform the multi-directional dynamic test of a steel frame structure with the real-time hybrid system and to evaluate the validation of the results. In this study, FEAPH, nonlinear finite element analysis program for hybrid only, was developed and the hybrid control system was optimized. The inefficient computational time was improved with a fixed number iteration method and parallel computational techniques used in FEAPH. Furthermore, the previously used data communication method and the interface between a substructure and an analysis program were simplified in the control system. As the results, the total processing time in real-time hybrid test was shortened up to 10 times of actual measured seismic period. In order to verify the accuracy and validation of the hybrid system, the linear and nonlinear dynamic tests with a steel framed structure were carried out so that the trend of displacement responses was almost in accord with the numerical results. However, the maximum displacement responses had somewhat differences due to the analysis errors in material nonlinearities and the occurrence of permanent displacements. Therefore, if the proper material model and numerical algorithms are developed, the real-time hybrid system could be used to evaluate the structural dynamic behavior and would be an effective testing method as a substitute for a shaking table test.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.