Improper disposal of electronic waste in the environment facilitates migration of heavy metals, especially lead, into the soil and can contribute to the bioavailability of this species. Based on a simplex-centroid mixture experimental design, small-scale tests were performed for incubation of printed circuit boards (PCBs) in mixtures containing organic matter (OM), kaolinite (KA) and iron oxides (IO) to verify lead migration. Regression equations were acquired and were adjusted to the obtained responses. Results showed high total content of Pb, ranging from 400 to 4000 mg kg -1 , depending on the mixture and incubation time. Mobility and/or bioavailability of lead in the mixtures were evaluated by a three-step sequential extraction. The bioavailability factor (BF) was obtained from the ratio of the sum of exchangeable fraction (F1) and the organically bound fraction (F2) by F1, F2 and the residual fraction (F3) and the values of bioavailability factor for Pb, the heavy metal considered of greatest environmental concern in this study, ranged between 0.16 and 0.52.
Effluents from pulp mills have a high organic load and can still contain high organic biorecalcitrant material that is harmful to the aquatic environment, even after undergoing biological treatment in effluent treatment plants. This study presents a novel treatment method tested on effluents (prior to and after biotreatment) from a Brazilian kraft pulp mill, based on hydroxyl radical production and hydrogen peroxide obtained by plasma generated by high-voltage electrolysis. These species present significant oxidation potential that could enable the complete breakdown of the organic matter. From the application of plasma to treat pulp mill effluent for a 7-hour period, it was obtained a chemical oxygen demand (COD) removal between 88.2 and 99.7%, total organic carbon (TOC) removal of 90.3 to 95.6%, and a color removal of 95.0 to 98.0%. The final pH of the treated effluent was 11.6 to 11.9. The results obtained in this study showed that the high-tension plasma treatment, applied on effluent from kraft pulp mills before and after biological treatment, can be an attractive alternative.
The method is based on the adsorptive accumulation of complex molybdenum(VI) with 8-hydroxyquinoline, using voltammetric square wave cathodic stripping voltammetry. The composition and concentration of the supporting electrolyte, frequency (Hz), amplitude (mV) and deposition time (s), were optimized by factorial design in relation to current reduction of molybdenum(VI). The optimum methodology provided the following values for the process variables: scan increase (0.5 mV), pulse amplitude (127 mV), frequency (96 Hz), adsorption time (80 s) and drop size (0.60 mm 2), the concentration of KNO 3 (2.0 mol L-1), acetate buffer (0.5 mol L-1) and 8-hydroxyquinoline (0.01 mol L-1). The results obtained after optimization showed a linear response in the range from 1.0 to 6.0 mg L-1 and limits of detection and quantification, respectively equal to 0.02 and 0.08 mg L-1. The molybdenum contained in the samples were determined using the optimized methodology, with values consistent with the values determined by atomic emission spectrometry with inductively coupled plasma (ICP-AES).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.