No abstract

Structure-property relationships in thermoplastic-apparent interpenetrating polymer networks (t-AIPNs), prepared by mechanical blending in a common solvent of crystallizable polyurethane (CPU) and styrene/acrylic acid random copolymer (S/AA), were investigated by means of wide-angle and small-angle X-ray scattering (WAXS and SAXS), dynamic mechanical analysis (DMA), thermally stimulated depolarization currents (TSDC) techniques, dielectric relaxation spectroscopy (DRS), and density, water uptake, deformation, and strength characteristics measurements. Several mechanical and dielectric relaxations of the pure components were characterized, and the effects thereupon induced by blending were followed. The two components show weak affinity to each other. The t-AIPNs can be classified into two groups with high and low contents of CPU, showing essentially the behavior of CPU and of S/AA, respectively. On the other hand, deviations from additivity in several properties indicate interactions between the two components, caused by the formation of H-bonds between their functional groups, and resulting in partial miscibility. In addition, significant changes are observed on some properties of the t-AIPNs on addition of small amounts of either of the components.

The nanostructure and dynamics over the temperature range of −140 to 300 °C were studied in a series of polycyanurate (PCN)–poly(tetramethylene glycol) (PTMG) hybrid networks by wide‐angle X‐ray diffraction and small‐angle X‐ray scattering, with a synchrotron radiation setup, and by differential scanning calorimetry (DSC) and laser‐interferometric creep rate spectroscopy (CRS) techniques, respectively. The networks were synthesized from the dicyanate ester of bisphenol A and hydroxyl‐terminated PTMG with a number‐average molecular weight of 1.000 g/mol; the PTMG content varied from 0 to 40 wt %, and the degree of its chemical incorporation into the PCN network changed from 78.8 to 97%. The noncrystalline structure and considerable structural nanoheterogeneity of the hybrid networks were shown. CRS/DSC analysis revealed a complicated dynamic behavior, that is, a wide dispersion of glass transitions in the hybrid networks due to the presence of nanodomains with different degrees of rigid crosslinking (i.e., compositional nanoheterogeneity). Besides the physical significance, the plurality of glass transitions found in the PCN–PTMG hybrid networks was also of practical interest because it resulted in increasing mechanical strength of the brittle PCN network due to microplasticity arising at room temperature and moderate temperatures and the retention of some rigidity and creep resistance at temperatures much higher than the basic glass‐transition temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3261–3272, 2005

No abstract