Abstract-Hospital Information System (HIS) is important to healthcare sector especially in public hospitals as they need to serve the public with high-quality healthcare treatments. HIS helps to improve patients care services. Thus, the Malaysian Government has introduced three (3) categories of HIS namely Total Hospital Information System (THIS), Intermediate Hospital Information System (IHIS), and Basic Hospital Information System (BHIS) among Malaysian public hospitals. However, only 15.2% of the Malaysian public hospitals are implementing the system. Moreover, there is limited number of empirical studies on HIS implementation in Malaysia. Thus, this paper aims to investigate issues and challenges in HIS implementation for each category of HIS by using in-depth interviews. Nine participants were involved in the interviews. The interview data were transcribed verbatim and analysed based on Content and Thematic Analysis using NVivo software. The results showed that different category of HIS faced different issues and challenges.Index Terms-Basic hospital information system, hospital information system, intermediate hospital information system, total hospital information system.
Many coagulants, mainly inorganic, are widely used in conventional water and wastewater treatment. Recent studies reported the occurrence of some chronic diseases associated with residual coagulant in treated wastewater. The use of alternative coagulants which are biodegradable and environmentally friendly could alleviate the problem associated with these diseases. This work investigates the capability of Jatropha curcas seed and presscake (the residue left after oil extraction) to reduce the turbidity of wastewater through coagulation. The coagulant was prepared by dissolving Jatropha curcas seed and presscake powder into solution. Then jar tests were conducted on kaolin solution as the model wastewater. The Jatropha seed was found to be an effective coagulant with more than 96% of turbidity removal at pH 1-3 and pH 11-12. The highest turbidity removal was recorded at pH 3 using a dosage of 120 mg/L. The flocs formed using Jatropha were observed to be bigger and to sediment faster when compared with flocs formed using alum. The turbidity removal was high (>98%) at all turbidities (100 NTU to 8000 NTU), suggesting its suitability for a wide range of industrial wastewater. The performance of Jatropha presscake after extraction of oil was also comparable to the fresh seed and alum at highly acidic and highly alkaline conditions. The addition of Jatropha did not significantly affect the pH of the kaolin samples after treatment and the sludge volume produced was less in comparison to alum. These results strongly support the use of Jatropha curcas seed and presscake as a potential coagulant agent.
Hospital Information System (HIS) is important to be adopted by the hospitals to improve their operations and services. Despite their importance, only 15.2% of Malaysian Public Hospitals implemented the system through THIS, IHIS and BHIS categories which shows low adoption level of HIS in Malaysia. This study aims to identify factors affecting the HIS adoption across different categories of HIS's hospitals. The finding showed that there are significant differences between factors affecting HIS adoption in the THIS compared to IHIS's hospitals, and THIS and BHIS's hospitals. However there is no significant difference among factors between IHIS with BHIS's hospitals.
The conventional process to treat dye wastewater is the physicochemical treatment such as coagulation, flocculation and adsorption process. A new approach has been demonstrated to treat Congo red dye wastewater, which is the adsorption-coagulation hybrid process. Natural coagulant extracted from Hibiscus sabdariffa seeds is used as the coagulant while activated carbon is used as the adsorbent in this case study. The objective of this experiment is to study the significant factors that will affect the efficiency of dye removal. Then, the optimum conditions for the hybrid process is determined using Respond Surface Methodology (RSM). The variables are pH, initial dye concentration, coagulant dosage and adsorbent dosage while the response of experiment is the dye removal percentage. A three-level and four-variable Box-Behnken design (BBD) is used for the RSM. A total of 27 sets of experimental results is required to determine the optimum conditions. Jar test is used to conduct the experiment with the addition of coagulant and adsorbent simultaneously. Based on the regression model analysis and ANOVA, the highly significant factors that contribute to the dye removal efficiency through adsorption-coagulation hybrid process are pH of solution and initial dye concentration. The RSM results shows that the optimised process parameters for adsorption-coagulation hybrid process with Hibiscus sabdariffa seeds as the coagulant and activated carbon as the adsorbent are pH 2, initial dye concentration of 385 ppm, coagulant dosage of 209 mg/L and adsorbent dosage of 150 mg/L. The dye removal reaches up to 96.67% under optimum parameters.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.