No abstract

No abstract

Currently the new state of power system relies on a precise monitoring of electrical quantities such as voltage and current phasors. Occasionally, its operation gets disturbed because of the flicking in load and generation which may result in the interruption of power supply or may cause catastrophic failure. The advanced technology of phasor measurement unit (PMU) is introduced in the late 1990s to measure the behavior of power system more symmetrically, accurately, and precisely. However, the implementation of this device at every busbar in a grid station is not an easy task because of its expensive installation and manufacturing cost. As a result, an optimum placement of PMU is much needed in this case. Therefore, this paper proposes a new symmetry approach of multiple objectives for the optimum placement of PMU problem (OPPP) in order to minimize the installed number of PMUs and maximize the measurement redundancy of the network. To overcome the drawbacks of traditional techniques in the proposed work a reduction and exclusion of pure transit node technique is used in the placement set. In which only the strategic, significant, and the most desirable buses are selected without considering zero injection buses (ZIBs). The fundamental novelty of the proposed work considers most importantly the reduction technique of ZIBs from the optimum PMU locations, as far as the prior approaches concern almost every algorithm have taken ZIBs as their optimal placement sets. Furthermore, a PMUs channel limits and an alternative symmetry location for the PMUs placement are considered when there is an outage or PMUs failure may occur. The performance of the proposed method is verified on different IEEE-standard such as: IEEE-9, IEEE-14, IEEE-24, IEEE-30, IEEE-57, IEEE-118, and a New England-39 bus system. The success of the proposed work was compared with the existing techniques’ outcomes from the literature.

No abstract

The expanding trend of wind power technology motivates scholars to pursue more investigation on optimising energy extraction from the wind and integrating high-quality power into the utility grid. This paper is aimed at introducing a novel application of the sine cosine algorithm (SCA) which attempts to find the optimal gains of proportional-integral (PI) controllers used to control the power electronic converter (PEC) equipped with the Variable speed Wind turbine (VSWT) such that a maximum power extraction and performance enhancement can be realized. The PEC equipped with the VSWT combines a machine side converter (MSC) and a grid-side inverter (GSI). Both the MSC and GSI are controlled by the proposed SCA-based PI controllers through cascaded vector control schemes. The MSC is responsible for controlling the wind generator's rotational speed, active power, and reactive power. The GSI is used to regulate the dc-link voltage and to keep the terminal voltage at the desired frame set by the operator. To obtain the optimum PI gains, the SCA is applied to minimize the sum of the integral squared error (ISE) of twelve PI controllers error inputs in the control schemes simultaneously. Performances of the proposed SCA-PI control schemes are assessed under severe grid disturbance and random wind speed variation to mimic more realistic conditions. The effectiveness of the proposed SCA-PI is verified in the MATLAB/Simulink environment, and the results are compared to those obtained using a grey wolf optimizer and particle swarm algorithm-based optimal PI controller. The simulation findings confirm the SCA-PI can be regarded as an efficacious way to enhance the performance of the VSWT.INDEX TERMS Wind turbine control, power electronic converter, MPPT, PMSG, PI controller, sine cosine algorithm.