Beluntas (Pluchea Indica L.) yang biasa digunakan sebagai astringent dan antipiretik memiliki potensi yang tinggi sebagai bahan baku produksi minyak atsiri. Tujuan dari penelitian ini adalah untuk mengoptimalkan solvent-free microwave extraction (SFME) dari daun beluntas menggunakan response surface metodology (RSM). Desain Box-Behnken dengan variasi waktu ekstraksi (60-120 menit), rasio bahan/labu distilat (0,06-0,1 g/ml), dan daya pemanas (150-450 Watt) digunakan untuk mengoptimalkan produksi minyak atsiri. Faktor rasio bahan/penyuling memiliki pengaruh signifikan paling tinggi terhadap rendemen minyak atsiri (P<0,05). Rendemen minyak atsiri meningkat seiring dengan meningkatnya daya pemanasan minyak dan waktu ekstraksi, dan sebaliknya. Di sisi lain, peningkatan rasio bahan/labu distilat memberikan dampak negatif terhadap rendemen minyak atsiri. Hasil minyak atsiri maksimum menggunakan metode SFME sebesar 0,2728 b/b% diperoleh untuk kondisi optimal waktu ekstraksi 90 menit, daya pemanasan 450 W, dan rasio bahan/labu distilat 0,06.Beluntas (Pluchea Indica L.) which commonly used as astringent and antipyretic has a high potential for the feedstock of essential oil production. The objective of this work is to optimize solvent-free microwave extraction (SFME) of Beluntas leaves by using response surface methodology (RSM). Box-Behnken Design with the variations of extraction time (60-120 min), feed/distiller ratio (0.06-0.1 g/ml), and heating power (150-450 W) was utilized to optimize essential oil yield. The feed/distiller ratio factor had the highest significant effect on the essential oil yield (P<0.05). Essential oil yield increased as the increase of oil heating power and time extraction, and vice versa. On the other hand, the increase in the feed/distiller ratio gave a negative impact on the essential oil yield. The maximum essential oil yield using SFME method of 0.2728 b/b% was obtained for the optimized condition of extraction time of 90 min, microwave heating power of 450 W, and feed/distiller ratio of 0.06.
PT. Industri Gula Glenmore (PT. IGG) merupakan salah satu industri gula di Indonesia yang menggunakan metode defekasi remelt karbonatasi (DRK) pada proses pemurnian nira. Dalam beberapa tahun kedepan, PT. IGG berencana menaikkan kapasitas produksi sebesar 8.000 ton/hari dari kapasitas semula sebesar 6.000 ton/hari. Oleh karena itu, studi ini bertujuan untuk mensimulasikan peningkatan produksi gula dari 6.000 menjadi 8.000 ton/hari dengan menganalisis neraca massa dan neraca energi dan mensimulasikannya menggunakan software Aspen Plus V11. Proses yang disimulasikan dalam studi ini berfokus pada kinerja karbonator. Hasil perhitungan kapasitas 6.000 ton/hari menunjukkan massa keluar dan energi yang dibutuhkan (∆H) pada karbonator 2 secara berturut-turut adalah 72.766,20 kg/jam dan -1.828,32 kkal/jam. Sedangkan pada kapasitas 8.000 ton/hari, massa keluar dan energi yang dibutuhkan pada karbonator 2 secara berturut-turut adalah 97.015,61 kg/jam dan -2.441,30 kkal/jam. Simulasi menggunakan Aspen Plus menunjukkan hasil dengan selisih perbedaan yang dapat ditoleransi dibandingkan dengan perhitungan neraca massa dan energi. Dari studi ini, simulasi peningkatan produksi gula akan berguna untuk mempermudah proses desain karbonator pada kenaikan kapasitas produksi atau penggantian metode pemurnian.
Effectiveness is a condition that shows how far the plan can be achieved. The more plans that can be achieved, the more effective these activities are, so that the word effectiveness can also be interpreted as the level of success that can be achieved from a particular way or effort in accordance with the objectives to be achieved. This research was conducted with the aim of: 1) knowing the learning of the yellow book using themethod amtsilati in PPAI Annahdliyah Karangploso Islamic Boarding School Malang. 2) knowing the application of themethod amtsilati in improving the ability of students to read the yellow book at PPAI Annahdliyah Karangploso Islamic Boarding School in Malang. 3) find out the Effectiveness of theMethod Amtsilati for Improving the Ability of Santri to Read the Yellow Book at PPAI Annahdliyah Karangploso Islamic Boarding School in Malang. The results showed that: 1) the learning of the yellow book using themethod amtsilati in PPAI Annahdliyah Islamic Boarding School was divided into 3 times, namely the Fajr Ba'da with rote learning material, the second Asr Ba'da with the delivery of material and understanding, and the third was Ba'da evening with understanding and evaluation by quiz or so on as a form of understanding of students. 2) the application of themethod amtsilati in the learning of the yellow book uses the classical learning model, which is proven to be effective even though it is classified into groups of volumes, but this model remains focused on the abilities and individual students. 3) the effectiveness of themethod Amtsilati is a clear system, has a clear basic concept, teaching model, and material and makes it easy for students to understand it. In addition learning outcomes using this method are also very influential is if the previous average was 66.07 but after using this method it increased to 84.38.
PT. Industri Gula Glenmore (PT. IGG) merupakan salah satu industri gula di Indonesia yang menggunakan metode defekasi remelt karbonatasi (DRK) pada proses pemurnian nira. Dalam beberapa tahun kedepan, PT. IGG berencana menaikkan kapasitas produksi sebesar 8.000 ton/hari dari kapasitas semula sebesar 6.000 ton/hari. Oleh karena itu, studi ini bertujuan untuk mensimulasikan peningkatan produksi gula dari 6.000 menjadi 8.000 ton/hari dengan menganalisis neraca massa dan neraca energi dan mensimulasikannya menggunakan software Aspen Plus V11. Proses yang disimulasikan dalam studi ini berfokus pada kinerja karbonator. Hasil perhitungan kapasitas 6.000 ton/hari menunjukkan massa keluar dan energi yang dibutuhkan (∆H) pada karbonator 2 secara berturut-turut adalah 72.766,20 kg/jam dan -1.828,32 kkal/jam. Sedangkan pada kapasitas 8.000 ton/hari, massa keluar dan energi yang dibutuhkan pada karbonator 2 secara berturut-turut adalah 97.015,61 kg/jam dan -2.441,30 kkal/jam. Simulasi menggunakan Aspen Plus menunjukkan hasil dengan selisih perbedaan yang dapat ditoleransi dibandingkan dengan perhitungan neraca massa dan energi. Dari studi ini, simulasi peningkatan produksi gula akan berguna untuk mempermudah proses desain karbonator pada kenaikan kapasitas produksi atau penggantian metode pemurnian.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.