Perlit doğal olarak oluşan silis kökenli asidik özellikte volkanik bir kayaç türüdür. Perlitin en önemli özelliği belirli sıcaklıklarda ısıtıldığında genleşerek gözenekli hafif bir yapı oluşturmasıdır. Oluşan bu gözenekli ve hafif yapı perlite endüstriyel bir değer katmaktadır. Özellikle genleşmiş perlit yüksek ısı ve ses yalıtım özelliği olan hafif harç üretimlerinde kullanılan en hafif malzemelerden biri olup aynı zamanda yüksek ısı ve yangına karşıda en dayanıklı malzemelerden birisidir. Son yıllarda ülkemizde çok sayıda genleşmiş perlit üreten tesisler açılmıştır. Ancak bu perlitlerin genleşmesindeki etken parametrelerin neler olduğu konusunda yeterli bir bilimsel çalışmaya rastlanılmamıştır. Genellikle çalışmalar genleşmiş perlitlerin ana hammadde olarak kullanılması ile edilen ürünlerin teknik performans özelliklerini tespit etmek amaçlıdır. Bu nedenle ham perlitten genleştirilmiş perlit üretimi ve genleşmeye etken parametrelerin tespit edilmesi amacıyla bir dizi ARGE çalışması yürütülmüştür. Bu çalışmada bünye suyunu kaybetme derecesi olarak bilinen 450 0 C'den başlayarak, 1050 0 C'ye kadar 7 farklı sıcaklıkta genleştirme deneyleri yapılmıştır. Ham perlitin genleşmesini etkileyen önemli parametreler arasında, agrega tane boyutu, genleşme sıcaklığı ve genleşme süresi gelmektedir. Bu parametreler bağlamında hedef olan 250-400 kg/m 3 arası birim hacim ağırlık değerlerinde genleşmiş perlit malzemesi elde etmek ve en uygun üretimi yapabilmek için gerekli koşullar incelenen parametrelere göre detaylı olarak açıklanmıştır.
Binaların dış cephelerinde son yıllarda özellikle mimari tasarım açısından kaplama malzemesi kullanımı giderek yaygınlaşmaktadır. Bugün inşaat sektöründe kullanılan ve dekoratif taş olarak da isimlendirilen bu kaplama malzemelerinin, birim ağırlıklarının yüksek olması nedeniyle ısı yalıtım amaçlı kullanımları pek öngörülmemektedir. Ayrıca birim ağırlıklarının yüksek olması, binaların ölü yükünü daha da artırması nedeniyle deprem sistematiği açısından da oldukça riskli durumlar oluşturmaktadır. Bu nedenle bu makalede, birim ağırlığı düşük, ısıl performans özelliği yüksek, esnek ve suya karşı hidrofob özellikte kaplama malzemelerinin geliştirilmesi amaçlanmıştır. Bu bağlamda, Isparta-Diyadin kalker ocaklarından temin edilen agregaların mikronize boyutta kırma kum olarak kullanılması ile polimer bileşenli kompozit formda çimento esaslı bir dizi harç örnekleri oluşturulmuştur. Ayrıca çalışma kapsamında, mevcut inşaat sektöründe binaların dış cephe uygulamalarında kullanılan kaplama malzemelerini temsil eden kontrol amaçlı harç örnekleri de tasarlanmıştır. Bu kontrol örneklerinin polimer bileşenli kompozit formdaki harç örnekleri ile teknik bağlamda mukayeseleri TS EN 998-1 standartları kapsamında yapılmıştır. Deneysel bulgulara göre çalışma bulgularından, birim ağırlıkları düşük, ısıl performans ve esneklik özellikleri yüksek dış cephe kaplama malzemelerinin geliştirilmesine önemli bir ışık tutulması amaçlanmıştır.
Son yıllarda doğal ve hafif agregaların inşaat endüstrisinde kullanımı giderek yaygınlaşmaktadır. Özelikle hafif agregalarla üretilen kompozit yapıda yalıtım amaçlı hafif harç uygulamaları günümüzün önemli konularından birisi haline gelmiştir. Bu bağlamda, bu çalışmada hafif agrega kategorisinde değerlendirilebilecek ülkemizde rezerv potansiyeli olan, ancak sadece tarım sektöründe kullanımı bilinen Vermikülitler ana hammadde olarak kullanılmıştır. Çimento esaslı Vermikülit agregalı polimer katkılı harç karışım tasarımları yapılarak bir dizi sıva numunesi üzerinde analizler yapılmıştır. Ayrıca deneysel çalışmada teknik mukayesenin yapılabilmesi için bu örnekler vermikülit agregalı polimer bileşensiz hazırlanan kontrol örnekleri ile analiz sonuçları karşılaştırılmıştır. Elde edilen bulgulara göre polimer bileşenli kompozit harç örneklerinin sırasıyla, kuru birim hacim ağırlık değerleri 560 kg/m3- 659 kg/m3 arasında, basınç dayanım değerleri 0,94 N/mm2-1,81 N/mm2 arasında, kapiler su emme oranları 0,328 kg/m2dak0.5-0,249 kg/m2dak0.5, ısı iletkenlik katsayıları ise 0,083 W/mK-0,094 W/mK olarak ölçülmüştür. Kontrol örneklerinde ise sırasıyla teknik bulgular 780 kg/m3, 2,64 N/mm2, 1,620 kg/m2dak0.5, 0,156 W/mK olarak belirlenmiştir. Bu sonuçlar bize ısı işlem görmüş vermikülit agreganın özellikle polimer katkı ile kullanımları durumunda, birim hacim ağırlığı düşük ısı yalıtımlı kompozit harç üretimlerinde değerlendirilebileceğini göstermiştir.
In today's construction industry, the production and use of the next generationof materials is becoming increasingly common. These materials; It isused in the formofpaper block handmen,plate products and composite mortars. Especially in recent years, the development of lightweight, flexible, outdoor resistant lightweight aggregate mortar products within the scope of energy efficient products in buildings has also become a necessity. Therefore, in this article, a series of plaster pilgrim samples are prepared in composite form with polymer component by classifying light aggregates of different origin in the size range of 0.5-1 mm and 1-2 mm and using them as the main raw material. In addition, in order to make technical comparison in experimental studies, control mortar samples, which are called traditional mortar used in exterior applications of existing buildings in the construction sector, are also designed. Within the scope of the study, all mortar samples were analyzed within the scope of TS EN 998-1 standard and other related standards in force today and technical findings were examined in detail in the article. In addition, the parameters affecting the result were determined with SPSS (V26) to determine the effectiveness of the experiment input values. Data were trained with ANFIS using parameters affecting the result and results were checked with test data.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.