The monosialodihexosylganglioside, GM3, and its binding to CD169 (Siglec‐1) have been indicated as key factors in the glycoprotein‐independent sequestration of the human immunodeficiency virus‐1 (HIV‐1) in virus‐containing compartments (VCCs) in myeloid cells. Here, lipid‐wrapped polymer nanoparticles (NPs) are applied as a virus‐mimicking model to characterize the effect of core stiffness on NP uptake and intracellular fate triggered by GM3‐CD169 binding in macrophages. GM3‐functionalized lipid‐wrapped NPs are assembled with poly(lactic‐co‐glycolic) acid (PLGA) as well as with low and high molecular weight polylactic acid (PLAlMW and PLAhMW) cores. The NPs have an average diameter of 146 ± 17 nm and comparable surface properties defined by the self‐assembled lipid layer. Due to differences in the glass transition temperature, the Young's modulus (E) differs substantially under physiological conditions between PLGA (EPLGA = 60 ± 32 MPa), PLAlMW (EPLAlMW = 86 ± 25 MPa), and PLAhMW (EPLAhMW = 1.41 ± 0.67 GPa) NPs. Only the stiff GM3‐presenting PLAhMW NPs but not the softer PLGA or PLAlMW NPs avoid a lysosomal pathway and localize in tetraspanin (CD9)‐positive compartments that resemble VCCs. These observations suggest that GM3‐CD169‐induced sequestration of NPs in nonlysosomal compartments is not entirely determined by ligand–receptor interactions but also depends on core stiffness.

The photoactuation of pen arrays made of polydimethylsiloxane carbon nanotube composites is explored, and the first demonstration of photoactuated pens for molecular printing is reported. Photoactuation of these composites is characterized using atomic force microscopy and found to produce microscale motion in response to modest illumination, with an actuation efficiency as high as 200 nm mW on the sub-1 s time scale. Arrays of composite pens are synthesized and it is found that local illumination is capable of moving selected pens by more than 3 µm out of the plane, bringing them into contact to perform controllable and high quality printing while completely shutting off the nonilluminated counterparts. In light of the scalability limitations of nanolithography, this work presents an important step and paves the way for arbitrary control of individual pens in massive arrays. As an example of a scalable soft actuator, this approach can also aid progress in other fields such as soft robotics and microfluidics.

Atomic force microscope (AFM) probes and AFM imaging by extension are the product of exceptionally refined silicon micromachining, but are also restricted by the limitations of these fabrication techniques. Here, the nanoscale additive manufacturing technique direct laser writing is explored as a method to print monolithic cantilevered probes for AFM. Not only are 3D printed probes found to function effectively for AFM, but they also confer several advantages, most notably the ability to image in intermittent contact mode with a bandwidth approximately ten times larger than analogous silicon probes. In addition, the arbitrary structural control afforded by 3D printing is found to enable programming the modal structure of the probe, a capability that can be useful in the context of resonantly amplifying nonlinear tip-sample interactions. Collectively, these results show that 3D printed probes complement those produced using conventional silicon micromachining and open the door to new imaging techniques.

When coated with microscale hydrophobic particles, macroscopic liquid droplets can become non-wetting liquid marbles that exhibit an array of fascinating solid-like properties. Specifically, the force required to uniaxially compress liquid marbles depends on their volume, but it is unclear if the particle coating plays a role. In contrast, the failure of marbles upon compression does depend on the particle coating, but the conditions for failure do not appear to change with marble volume. Here, we experimentally study the elastic deformation and failure of liquid marbles and, by applying a doubly truncated oblate spheroid model to quantify their surface area, explore the role of marble volume and particle composition. First, we find that the work required to compress liquid marbles agrees with the product of the core fluid surface tension and the change in the marble surface area, validating that the elastic mechanics of liquid marbles is independent of the particle coating. Next, we study marble failure by measuring their ductility as quantified by the maximum fractional increase in marble surface area prior to rupture. Not only does marble ductility depend on the particle coating, but it also depends on marble volume with smaller marbles being more ductile. This size effect is attributed to an interaction between marble curvature and particle rafts held together by interparticle forces. These results illuminate new avenues to tailor the rupture of liquid marbles for applications spanning smart fluid handling and pollution mitigation.

Resolution and field-of-view often represent a fundamental tradeoff in microscopy. Atomic force microscopy (AFM), in which a cantilevered probe deflects under the influence of local forces as it scans across a substrate, is a key example of this tradeoff with high resolution imaging being largely limited to small areas. Despite the tremendous impact of AFM in fields including materials science, biology, and surface science, the limitation in imaging area has remained a key barrier to studying samples with intricate hierarchical structure. Here, we show that massively parallel AFM with >1000 probes is possible through the combination of a cantilever-free probe architecture and a scalable optical method for detecting probe–sample contact. Specifically, optically reflective conical probes on a comparatively compliant film are found to comprise a distributed optical lever that translates probe motion into an optical signal that provides sub-10 nm vertical precision. The scalability of this approach makes it well suited for imaging applications that require high resolution over large areas.