The tensile strength of unidirectional carbon fiber reinforced plastics under a high strain rate was experimentally investigated. A high-strain-rate test was performed using the tension-type split Hopkinson bar technique. In order to obtain the tensile stress-strain relations, a special fixture was used for the impact tensile specimen. The experimental results demonstrated that the tensile modulus and strength in the longitudinal direction are independent of the strain rate. In contrast, the tensile properties in the transverse direction and the shear properties increase with the strain rate. Moreover, it was observed that the strain-rate dependence of the shear strength is much stronger than that of the transverse strength. The tensile strength of off-axis specimens was measured using an oblique tab, and the experimental results were compared with the tensile strength predicted based on the Tsai-Hill failure criterion. It was concluded that the tensile strength can be characterized quite well using the above failure criterion under dynamic loading conditions.

No abstract

It is well known that the strength of glass fibers increases with increasing strain rate. Consequently, impact strength of glass fiber is competitive with that of carbon fiber. This strengthening phenomenon is well recognized for bulk glass. Strain-rate dependence of the strength for bulk glass was described by considering slow crack growth in glass. The analytical model that considered the slow crack growth of glass is proposed to predict the strength of glass fibers. The proposed model considered the stress corrosion limit and a constant crack velocity region. Calculations showed almost same results with the previous model, however, some differences were confirmed. To discuss the validity of the analysis, tensile tests of E-glass fiber bundles were conducted at various strain rates. It was observed that the fracture behaviors differ with the strain rates. Experimental results showed that the strength of E-glass fibers increased with increasing strain rate. Furthermore, we confirmed that the analytical results were in good agreement with the experimental results. The strain-rate dependence of the strength of glass fibers was successfully predicted by considering the slow crack growth in glass.

No abstract

No abstract