No abstract

This work reports on the performance of a segmented polymer electrochromic display that was fabricated with solution-based processes in ambient atmosphere. An encapsulation process and the combination of structured wells for the polymer electrochrome and electrolyte layers as well as the use of a preoxidized counter polymer yields high contrasts and fast switching speeds. Asymmetric driving-with respect to time-of the display is investigated for the first time and the degradation effects in the electrochrome layer are analyzed and addressed to yield a stable device exceeding 100,000 switching cycles. A printed circuit board was integrated with the display, allowing the device to be run as a clock, where the segments only required short pulses to switch without the need for a constant current to maintain its state. Such an application pairs well with the advantages of electrochromic polymers, drawing on its high contrast, stability, and ability to maintain its colored or colorless state without the need for a constant power supply, to demonstrate the promise as well as the challenges of developing more sophisticated electrochromic devices.

Motivated by the possibility of modifying energy levels of a molecule without substantially changing its band gap, the impact of gradual fl uorination on the optical and structural properties of zinc phthalocyanine (F n ZnPc) thin fi lms and the electronic characteristics of F n ZnPc/C 60 ( n = 0, 4, 8, 16) bilayer cells is investigated. UV-vis measurements reveal similar Q-and B-band absorption of F n ZnPc thin fi lms with n = 0, 4, 8, whereas for F 16 ZnPc a different absorption pattern is detected. A correlation between structure and electronic transport is deduced. For F 4 ZnPc/C 60 cells, the enhanced long range order supports fi ll factors of 55% and an increase of the short circuit current density by 18%, compared to ZnPc/C 60 . As a parameter being sensitive to the organic/organic interface energetics, the open circuit voltage is analyzed. An enhancement of this quantity by 27% and 50% is detected for F 4 ZnPc-and F 8 ZnPc-based devices, respectively, and is attributed to an increase of the quasi-Fermi level splitting at the donor/acceptor interface. In contrast, for F 16 ZnPc/C 60 a decrease of the open circuit voltage is observed. Complementary photoelectron spectroscopy, external quantum effi ciency, and photoluminescence measurements reveal a different working principle, which is ascribed to the particular energy level alignment at the interface of the photoactive materials.

Vertically translating prestressed spring supported microelectromechanical shutters can be used as digital spatial light modulators for high speed, efficient transmissive display applications. Prestressed MEMS shutters have been fabricated alongside top gate a-Si:H TFTs using a four mask TFT-MEMS process and active matrix driving has been demonstrated.

No abstract