Aligned polymer microstructures in the field of biomaterials, semiconductors, and ion‐conductive membranes expand steadily. Here, an alternative aligned polybenzimidazole (WM PBI) microstructures fabrication strategy based on the utilization of a weak magnetic field (0.3 T) via the solvent casting method is demonstrated. The anisotropic alignment is induced by the interaction of the π‐electron‐rich structure with the magnetic field. A ripple‐like structure was observed in the field‐emission scanning electron microscopy image for the WM PBI membrane, which depicted the successful alignment of the PBI structure toward magnetic field direction. Electrochemical studies revealed the bulk resistance of WM PBI with only 13.71 × 103 Ω compared to the unaligned PBI (WOM PBI) (63.01 × 103 Ω). WM PBI marked as the highest proton conductivity of 610.66 × 10−6 S cm−1, and it was proven that the external magnetic field does bring the impact toward the augmentation of the proton conductivity, which is useful in various future generation applications.

Carbon‐doped titania (C‐TiO2) nanoparticles were synthesized by the sol–gel method at different calcination temperatures (300–600°C) employing titanium tetraisopropoxide (TTIP) as the titanium source and polyoxyethylene sorbitan monooleate (Tween 80) as the carbon source. The physical properties of C‐TiO2 samples were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic activities were checked through the photodegradation of phenolphthalein (PHP) under ultraviolet irradiation. The UV spectrum showed that the carbon doping extends the absorption range of TiO2 to the visible region. However, the photocatalytic activity is affected by the electron–hole recombination phenomenon, as revealed by the photoluminescence (PL) study. According to the PL spectra, carbon doping reduces the edge‐to‐edge electron–hole recombination. Nevertheless, the number of defect sites is greatly influenced by the calcination temperature of C‐TiO2. C‐TiO2 that was calcined at 400°C showed the highest photodegradation percentage of PHP, which was mainly attributed to the synergic effect of the low direct edge‐to‐edge electron–hole recombination, high content of defect sites, and retention of active electrons on the surface hydroxyl group.