Ultrasonic additive manufacturing (UAM) is a solid state manufacturing process for joining thin metal tapes using principles of ultrasonic metal welding. The process operates at low temperatures, enabling dissimilar material welds without generating harmful intermetallic compounds. In this study, a 9 kW UAM system was used to create joints of Al 1100 and commercially pure titanium. Viable process parameters were identified through pilot weld studies via controlled variation of weld force, amplitude and weld speed. Push-pin delamination tests and shear tests were performed, comparing as-built, heat treated and spark plasma sintering treated samples. Heat treated and spark plasma sintering treated samples yielded mechanical strengths over twice that of as-built samples. Electron backscatter diffraction measurements show that deformation and grain refinement only take place in the aluminium layers. Heat treated samples exhibit a thin intermetallic layer, which is hypothesised as constraining the interface, leading to the improved strength.

No abstract

No abstract

No abstract

Ultrasonic additive manufacturing (UAM) is a solid-state additive manufacturing technique employing principles of ultrasonic welding coupled with mechanized tape layering to fabricate fully functional parts. However, parts fabricated using UAM often exhibit a reduction in strength levels when loaded normal to the welding interfaces (Z-direction). In this work, the effect of post-weld heat treatments (PWHT) on Al-6061 builds fabricated using the UAM process was explored aiming to improve the mechanical strength of the UAM builds. Tensile testing with digital image correlation (DIC) coupled with metallography along with multi-scale structure characterization (SEM-EBSD) was used to investigate and rationalize the mechanical performance of the UAM builds. It was established that PWHTs may improve the Z-strength level by the factor of ~33.5 (from ~46 MPa to 177 MPa). The improvements in the strength level were primarily aided by material aging and grain growth across the bond interface.

Present research in metal additive manufacturing (AM) focuses on designing processing parameters around existing alloys designed for traditional manufacturing. However, to maximize the benefits of AM, alloys should be designed to specifically take advantage of the unique thermal conditions of these processes. This study focuses on the development of a design methodology for alloys in AM, using a newly developed Al-Ce alloy as an initial case study. To evaluate the candidacy of this system for fusion based additive manufacturing directed energy deposition processes, single-line laser melts were made on cast Al-12Ce

No abstract

No abstract