ResumoO objetivo deste trabalho é investigar o efeito da pulsação de corrente sobre a microestrutura da zona fundida de soldas dissimilares entre o aço inoxidável ferrítico AISI 444 e o austenítico AISI 316L. Chapas dos referidos aços foram unidas pelo processo de soldagem TIG. As soldagens foram realizadas variando-se a frequência de pulsação de 2 a 8 Hz e sem pulsação, mantendo-se constante a energia de soldagem. A caracterização microestrutural foi realizada por meio de microscopia óptica, MEV, EDS e EBSD. Os resultados mostraram haver um efeito da frequência de pulsação sobre a homogeneidade e microestrutura final da zona fundida. Palavras-chave: Soldagem TIG; Corrente pulsada; Aços inoxidáveis. Abstract The objective of this study is to investigate the effect of pulse current on the microstructure of the fusion zone of dissimilar welds between the AISI 444 ferritic stainless steel and AISI 316L austenitic steel. Thin plates of the respective steels were joint by the TIG process. The welds were made varying the pulse frequency from 2 to 8 and without pulse, maintaining constant the heat input. The characterization of the microstructure was performed using the techniques of optical microscopy, MEV, EDS and EBSD. The results demonstrated that there was an effect of pulsed frequency on homogeneity and final microstructure in the fusion zone.
ResumoO objetivo deste trabalho é investigar a esferoidização do aço SAE 1080 e os respectivos efeitos da variação do tempo na microestrutura final e na dureza do material. O aço SAE 1080 foi submetido a recozimento isotérmico, por tempo prolongado, utilizando-se 90, 100 e 120 horas de aquecimento à temperatura de 715ºC. Os resultados mostraram que é possível esferoidizar o aço SAE 1080 nos respectivos tempos escolhidos e perceber aumento da quantidade de esferoiditas, assim como decréscimo na dureza. Palavras-chave: Aço SAE 1080; Esferoidização; Dureza.
SPHEROIDIZATION OF SAE 1080 STEEL AbstractThe objective of this study is to investigate the spheroidization of steel SAE 1080 and its respective effect of time variation in the final microstructure and in the hardness of the material. The SAE 1080 steel is subjected to isothermal annealing for a long time using 90, 100 and 120 hours of heating at 715ºC temperature. The results demonstrated that it is possible spheroidize SAE 1080 steel in their respective chosen hours and notice increase in the quantity of spheroidites and decrease in the hardness.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.