RESUMOO objetivo deste trabalho foi verificar a influência da adição de resíduos de poli (tereftalato de etileno) -PET -sobre a resistência mecânica em concreto de cimento Portland. O PET foi utilizado no formato encontrado em indústria de reciclagem de embalagens. Os resíduos foram utilizados como substitutos de parte dos agregados do concreto e, para cada um dos resíduos, foram preparados quatro traços (10%, 20%, 30% e 40%, em volume). Para a preparação dos traços foi utilizado cimento Portland de Alta Resistência Inicial (CPV -ARI) fornecido pela Votoran. A partir de cada uma das misturas obtidas foram confeccionados quinze corpos-de-prova em formato cilíndrico conforme a norma NBR 5738. Foram preparados também corpos-de-prova sem substituição de agregados que serviram como material de referência. Os ensaios de compressão foram realizados de acordo com a norma NBR 5739, nas idades de um, três e sete dias e, em cada uma destas idades, foram testados cinco corpos-de-prova de cada traço. Para todos os traços obtidos e, em todas as idades das amostras ensaiadas, pode-se notar uma tendência de redução da resistência mecânica com o aumento da fração volumétrica de substituição de agregados. O maior valor de resistência à compressão axial com a idade de sete dias foi apresentado pelo traço sem substituição de agregados (15,38 MPa), e o menor valor, para a mesma idade, foi apresentado pelo traço com 40 % de substituição de agregados por resíduos de PET (1,94 MPa).Palavras-chaves: concreto, cimento Portland, resíduos, poli (tereftalato de etileno) -PET. Evaluation of concrete made of Portland cement containing PET wastes ABSTRACTThis work aims to verify the influence of poly (ethylene terephthalate) -PET -wastes additions on the concrete mechanical strength. The concrete used was prepared with a Portland cement. The PET was used in the as received shape from the packing recycling industry. The wastes were used as substitutes of concrete aggregates. For each waste type four mixtures (10, 20, 30 and 40 vol-%) were prepared. In order to prepare mixtures, high early strength Portland cement (CPV -ARI) was used, supplied by the Votoran Company. From each mixture obtained fifteen cylindrical shaped samples were prepared. The samples were prepared in accordance to the NBR 5738 Brazilian Standard. As reference materials, samples without wastes were also prepared. Mechanical strength tests were performed according to the Brazilian Standard NBR 5739. In this case, the following ages were tested: one, three and seven days. For each age, five samples were tested from each mixture prepared. For all mixtures obtained and for each sample age tested, a reduction in the mechanical strength occurred as the PET waste additions were increased. The highest mechanical strength value, 15.38 MPa, was obtained using sample with seven days age and mixture without aggregates. The lowest strength value, 1.94 MPa, was also obtained using sample with seven days age but with 40 vol-% PET waste addition.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.