The acoustical characteristics of cooling fans are an essential criterion of product quality in the automotive industry. Fan modules have to suffice growing customer expectations which are reflected in the comfort requirements set by car manufacturers around the world. In order to locate dominant acoustic sources and to reduce the noise emission generated by a shrouded fan configuration, numerical simulations and experimental investigations are performed. The working approach considers variously modified fan geometries and their evaluation regarding arising vortex flow phenomena and their effect on a decreased sound pressure level (SPL) in consideration of an improvement or the constancy of aerodynamic fan performance. Particular emphasis lies on the analysis of secondary flows in the blade tip region by post-processing CFD-results. Due to the large number of geometrical modifications investigated and the importance of highly resolved eddy structures, a hybrid approach is chosen by applying the SAS-SST turbulence model in URANS simulations. The SAS (Scale Adaptive Simulation) delivers LES (Large Eddy Simulation) content in unsteady regions of a RANS-simulation and exhibits not nearly the high computational effort needed to perform a full scale LES. An assessment of the actual propagation of noise emission into the far-field is made by performing experimental investigations on the most promising modifications. The acoustic measurements are carried out in a fan test stand in the anechoic chamber of Duesseldorf University of Applied Sciences. The aerodynamic performance is measured in a fan test rig with an inlet chamber setup in accordance to ISO 5801. The measured acoustical and aerodynamic performances are validated by the industrial partner. The results of the acoustic measurements are in turn utilized to determine indicators of noise radiation in the numerical simulation. Within this work an innovative geometry modification is presented which can be implemented into shrouded fan configurations with backward-skewed blades. The new design exhibits a reduced SPL (A-weighted) of approx. 4 dB over the entire operating range while showing no significant deterioration on the aerodynamic performance. While the design was registered for patent approval cooperatively by the industrial partner and Duesseldorf University of Applied Sciences, further investigations regarding variations of design parameters are performed and presented in this paper. All numerical simulations are performed with ANSYS CFX, a commercial solver widely spread in the industry. Methods similar to those shown in this work can be implemented in the design phase of axial fans in order to develop acoustically optimized fan geometries.
This paper deals with the reduction of aerodynamically generated noise in passenger car Cooling-Fan-Modules (CFM), caused by the interaction between the impeller and the downstream-located strut configuration of the axial fan. Even after the car engine is switched off, the fan remains active, as long as cooling is required for certain vehicle components. Especially after a car has been parked in closed parking areas, in close proximity to residential buildings or public places, the noise emission can be a problem. This issue is addressed by dampening the rotor-stator-interaction through passive construction measures. In order to ensure optimal noise reduction, 8 critical design features of the struts are identified and investigated using statistical design of experiment methods (DoE). Based on the results, dedicated insights about the effects of concrete strut features on significant regions of the acoustic fan spectrum are obtained. Furthermore, an optimized strut configuration is derived and metrologically validated using a polyoptimization method. Compared to a current serial baseline configuration, a reduction of the overall sound pressure level by 2.6 dB(A), as well as a reduction of the blade passage frequency tone by 17.6 dB(A) is achieved.
The acoustical characteristics of fans are an essential criterion of product quality and are continually growing in importance as for example cooling fan modules in the automotive industry have to suffice high comfort requirements. In order to locate dominant acoustic sources and to reduce the noise emission generated by a shrouded fan configuration, numerical simulations are performed. The working approach considers variously modified fan geometries and their evaluation regarding arising vortex flow phenomena and their effect on a decreased sound pressure level (SPL) in consideration of an improvement or the constancy of aerodynamic fan performance. Particular emphasis lies on the analysis of secondary flows in the blade tip region by postprocessing CFD-results. Due to the large number of geometrical modifications investigated and the importance of highly resolved eddy structures, a hybrid approach is chosen by applying the SAS-SST turbulence model in URANS simulations. The SAS (Scale Adaptive Simulation) delivers LES (Large Eddy Simulation) content in unsteady regions of a RANS-simulation and exhibits not nearly the high computational effort needed to perform a full scale LES. An assessment of the actual propagation of noise emission into the far-field is made by performing experimental investigations on the most promising modifications. The acoustic measurements are carried out in a fan test stand in the anechoic chamber of the University of Applied Sciences Duesseldorf. The aerodynamic performance is measured in a fan test rig with an inlet chamber setup in accordance with ISO 5801. The measured acoustical and aerodynamic performance is validated by the industrial partner. The results of the acoustic measurements are in turn utilized to determine indicators of noise radiation in the numerical simulation. Within this work an approach is presented where the analyses of secondary flows in the blade tip region provide the basis for an innovative noise reduction design in a shrouded fan configuration. The new design exhibits a reduced SPL (A-weighted) of approx. 4 dB over the entire operating range while showing no significant deterioration on the aerodynamic performance. The design was registered for patent approval cooperatively by the industrial partner and the University of Applied Sciences Duesseldorf, while minor design parameters are still subject to further improvements. All numerical simulations are performed with Ansys CFX, a commercial solver widely spread in the industry. Methods similar to those shown in this work can be implemented in the design phase of axial fans in order to develop acoustically optimized fan geometries.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.