PURPOSE: The aim of this study was to design and evaluate in the laboratory a new intraocular lena (IOL) intended to provide superior octtlar optical quality by reducing spherical aberration. METHODS: Corneal topography measurements were performed on 71 cataract patients using an Orbscan I. The measured corneal surface shapes were used to determine the wavefront aberration of each cornea. A model cornea was then designed to reproduce the measured average spherical aberration. This model cornea was used to design IOLs having a fixed amount of negative spherical aberration that partially compensates for the average positive spherical aberration of the cornea. Theoretical and physical eye models were used to assess the expected improvement in optical quality of an eye implanted with this lens. RESULTS: Measurements of optical quality provided evidence that if this modified prolate IOL was centered within 0.4 mm and tilted less than 7 degrees, it would exceed the optical performance of a conventional spherical IOL. This improvement occurred without an apparent loss in depth of focus. CONCLUSION: A new IOL with a prolate anterior surface, designed to partially compensate for the average spherical aberration of the cornea, is intended to improve the ocular optical quality of Pseudophakie patients. [J Refract Surg 2002;18: 683-691]

The predictability in postoperative refraction found by applying the LHP concept and paraxial ray tracing was excellent. However, the small sample, with its unusually slight variation in axial lengths, did not allow statistically significant differences between different postoperative refraction prediction methods to be demonstrated.

Either criterion may be applied in accordance with a proposed international standard for IOLs. The model eye method can be applied over a broader range of dioptric powers and is relevant for materials that interact with aqueous. Both tests appear to have a greater ability to detect unwanted surface aberrations than resolution testing of IOLs in a water cell using parallel light, a method described in the current American National Standards Institute standard.

Theoretical calculations of the polychromatic modulation transfer function (MTF) and wave-front aberration were performed with physiological eye models. These eye models have an amount of spherical aberration that is representative of a normal population of pseudophakic eyes implanted with two different types of intraocular lens (IOL) made from high-refractive-index silicone. These theoretical calculations were compared with the measured contrast sensitivity function (CSF) under mesopic lighting conditions and with wave-front aberration (obtained with a Hartmann-Shack wave-front sensor) collected from 37 patients bilaterally implanted with the same types of lens. The relationships between the ocular wave-front aberration and the MTF predicted by the eye models and the CSF and the ocular wave-front aberration measured in eyes implanted with IOLs were investigated. The predicted improvements in MTF and wave-front aberration correlated well with the improvements measured in practice. Physiological eye models are therefore useful tools for IOL design.

No abstract