No abstract

The aqueous crystallization-driven sphere-to-rod transition of poly(lactide)-b-poly(acrylic acid), PLA-b-PAA block copolymers, with a short homochiral PLA core forming block and a 10 times longer (in terms of degree of polymerization) PAA corona forming block is presented. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) is utilized to follow the kinetics of the transition and wide angle X-ray diffraction (WAXD) to confirm the correlation between degree of crystallinity and morphology. Studies at different concentrations and solvent mixtures provide valuable information regarding the nucleation and growth mechanism of the system, showing that the micelle dynamics are a key aspect of the assembly process. Furthermore, the in situ crystallization-driven cylinder formation during the acrylate ester hydrolysis reaction is demonstrated. Finally, we report that the micelle morphology can be switched between cylinders and spheres by facilitating or blocking the crystallization of the core block, demonstrating a simple method to control the morphology of the resultant assembly.

A series of poly(L-lactide)-b-poly(acrylic acid) (PLLA-b-PAA) diblock copolymers with a range of hydrophobic or hydrophilic block lengths were designed in order to tune the size of the resultant cylindrical micelles using a crystallization-driven self-assembly (CDSA) approach. The precursor poly(L-lactide)-b-poly(tetrahydropyran acrylate) (PLLA-b-PTHPA) was synthesized by a combination of ring-opening polymerization (ROP) and reversible additionfragmentation chain transfer (RAFT) polymerization. The CDSA process was carried out in a tetrahydrofuran/water (THF/H 2 O) mixture during the hydrolysis of PTHPA block at 65 °C using an evaporation method. A majority of PLLA-b-PAA diblock copolymers resulted in the formation of cylindrical micelles with narrow size distributions (L w /L n < 1.30) as determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). Furthermore, the length of PLLA block was found to control the length of the resultant cylindrical micelles while the length of PAA block governed their widths. Synchrotron small-angle X-ray scattering (SAXS) further proved that the length increase of these cylinders was a consequence of the decreasing PLLA block lengths. The crystalline core nature of these cylinders was characterized by wide-angle X-ray diffraction (WAXD), and the relative core crystallinity was calculated to compare different samples. Both the hydrophobic weight fraction and the relative core crystallinity were found to determine the geometry of the formed PLLA-b-PAA cylindrical micelles. Finally, changing the pH conditions of the CDSA process was found to have no significant effect on tuning the resultant dimensions of the cylinders.

The effect of covalently attaching 4-(dimethylamino)pyridine (DMAP) functionality to the hydrophobic core of a polymeric micelle in water has been investigated in the context of acylation reactions employing non-water-soluble substrates. For this purpose a novel temperature-responsive polymeric micelle has been synthesized using reversible addition−fragmentation chain transfer (RAFT) polymerization techniques. The reactivity of the tethered organocatalyst within the nanostructure was found to be extremely high, improving in some cases the acylation rates up to 100 times compared to those for unsupported DMAP in organic solvents. Moreover, the catalytic nanoreactors have been demonstrated to be capable of reuse up to 6 times while maintaining high activity.

Block copolymers are well-known to self-assemble into a range of 3-dimensional morphologies. However, due to their nanoscale dimensions, resolving their exact structure can be a challenge. Transmission electron microscopy (TEM) is a powerful technique for achieving this, but for polymeric assemblies chemical fixing/staining techniques are usually required to increase image contrast and protect specimens from electron beam damage. Graphene oxide (GO) is a robust, water-dispersable, and nearly electron transparent membrane: an ideal support for TEM. We show that when using GO supports no stains are required to acquire high contrast TEM images and that the specimens remain stable under the electron beam for long periods, allowing sample analysis by a range of electron microscopy techniques. GO supports are also used for further characterization of assemblies by atomic force microscopy. The simplicity of sample preparation and analysis, as well as the potential for significantly increased contrast background, make GO supports an attractive alternative for the analysis of block copolymer assemblies.

Polymeric nanostructures can be synthesized where the catalytic motif is covalently attached within the core domain and protected from the environment by a polymeric shell. Such nanoreactors can be easily recycled, and have shown unique properties when catalyzing reactions under pseudohomogeneous conditions. Many examples of how these catalytic nanostructures can act as nanosized reaction vessels have been reported in the literature. This prospective will focus on the exclusive features observed for these catalytic systems and highlight their potential as enzyme mimics, as well as the importance of further studies to unveil their full potential.

The spontaneous one-step synthesis of hollow nanocages and nanotubes from spherical and cylindrical micelles based on poly(acrylic acid)-b-polylactide (P(AA)-b-P(LA)) block copolymers (BCPs) has been achieved. This structural reorganization, which occurs simply upon drying of the samples, was elucidated by transmission electron microscopy (TEM) and atomic force microscopy (AFM). We show that it was necessary to use stain-free imaging to examine these nanoscale assemblies, as the hollow nature of the particles was obscured by application of a heavy metal stain. Additionally, the internal topology of the P(AA)-b-P(LA) particles could be tuned by manipulating the drying conditions to give solid or compartmentalized structures. Upon re-suspension, these reorganized nanoparticles retain their hollow structure and can be display significantly enhanced loading of a hydrophobic dye compared to the original cylinders.

A series of poly(styrene-b-dimethylsiloxane-bstyrene) (SDS) triblock copolymers with molecular weights ranging from 55 to 150 kg/mol and polydimethylsiloxane (PDMS) volume fractions ranging from 0.59 to 0.83 were used to fabricate membranes for ethanol/water separation by pervaporation. The rigid polystyrene (PS) microphase provides the membrane with structural integrity, while the rubbery PDMS microphase provides nanoscale channels for ethanol transport. We use a simple model to study the effect of morphology and PDMS volume fraction on permeabilitites of ethanol and water through the block copolymer membranes. We defined normalized permeabilities of ethanol and water to account for differences in morphology and PDMS volume fraction. We found that the normalized ethanol permeability in SDS copolymers was independent of the total polymer molecular weight. This is qualitatively different from what was previously reported for poly(styrene-b-butadiene-b-styrene) (SBS) membranes, where the normalized ethanol permeability was found to be a sensitive function of total molecular weight [J. Membr. Sci. 2011, 373, 112]. We demonstrate that this is due to differences in the Flory−Huggins interaction parameter (χ) for the two systems. When χN is less than 100 (N is the number of segments per chain), the two microphases are weakly segregated, and the presence of glassy PS segments in the transporting microphase impedes ethanol transport. When χN exceeds 100, the two microphases are strongly segregated and the glassy PS segments do not mix with the transporting phase. We compare these results with normalized ionic conductivity data previously reported for mixtures of a lithium salt and polystyrene-b-poly(ethylene oxide) (SEO). Evidence suggests that the product χN governs the transport of widely different species such as ethanol and lithium salts through block copolymer membranes. Surprisingly, the normalized permeability of water is independent of total molecular weight for both SDS and SBS block copolymers.