Volatile organic compounds (VOCs) are harmful to environment and human health. Catalytic oxidation has been used in VOC abatement for over 60 years, and it has proven to be an effective technology. A large variety of VOCs set high demands for the treatment, and therefore catalytic oxidation needs still to be developed further. This paper reviews current aspects and future research needs related to VOCs and catalytic VOC treatment concentrating on solvent-based, chlorinated and sulphur-containing VOCs.

No abstract

Abstract:The treatment of volatile organic compounds (VOC) emissions is a necessity of today. The catalytic treatment has already proven to be environmentally and economically sound technology for the total oxidation of the VOCs. However, in certain cases, it may also become economical to utilize these emissions in some profitable way. Currently, the most common way to utilize the VOC emissions is their use in energy production. However, interesting possibilities are arising from the usage of VOCs in hydrogen and syngas production. Production of chemicals from VOC emissions is still mainly at the research stage. However, few commercial examples exist. This review will summarize the commercially existing VOC utilization possibilities, present the utilization applications that are in the research stage and introduce some novel ideas related to the catalytic utilization possibilities of the VOC emissions. In general, there exist a vast number of possibilities for VOC OPEN ACCESSCatalysts 2015, 5 1093 utilization via different catalytic processes, which creates also a good research potential for the future.

Abstract:In this work, silica-titania supported catalysts were prepared by a sol-gel method with various compositions. Vanadia was impregnated on SiO 2 -TiO 2 with different loadings, and materials were investigated in the partial oxidation of methanol and methyl mercaptan to formaldehyde. The materials were characterized by using N 2 physisorption, X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), X-ray photoelectron spectroscopy (XPS), Scanning transmission electron microscope (STEM), NH 3 -TPD, and Raman techniques. The activity results show the high importance of an optimized SiO 2 -TiO 2 ratio to reach a high reactant conversion and formaldehyde yield. The characteristics of mixed oxides ensure a better dispersion of the active phase on the support and in this way increase the activity of the catalysts. The addition of vanadium pentoxide on the support lowered the optimal temperature of the reaction significantly. Increasing the vanadia loading from 1.5% to 2.5% did not result in higher formaldehyde concentration. Over the 1.5%V 2 O 5 /SiO 2 + 30%TiO 2 catalyst, the optimal selectivity was reached at 415 • C when the maximum formaldehyde concentration was~1000 ppm.

No abstract

No abstract