No abstract
Many correlated systems feature an insulator-to-metal transition that can be triggered by an electric field. Although it is known that metallization takes place through filament formation, the details of how this process initiates and evolves remain elusive. We use in-operando optical reflectivity to capture the growth dynamics of the metallic phase with space and time resolution. We demonstrate that filament formation is triggered by nucleation at hotspots, with a subsequent expansion over several decades in time. By comparing three case studies (VO2, V3O5 and V2O3), we identify the resistivity change across the transition as the crucial parameter governing this process. Our results provide a spatiotemporal characterization of volatile resistive switching in Mott insulators, key for emerging technologies such as optoelectronics or neuromorphic computing.
The interdependences of different phase transitions in Mott materials are fundamental to the understanding of the mechanisms behind them. One of the most important relations is between the ubiquitous structural and electronic transitions. Using IR spectroscopy, optical reflectivity and x-ray diffraction we show that the metal-insulator transition (MIT) is coupled to the structural phase transition in V2O3 films. This coupling persists even in films with widely varying transition temperatures and strains. Our findings are in contrast to recent experimental findings and theoretical predictions. Using V2O3 as a model system, we discuss the pitfalls in measurements of the electronic and structural states of Mott materials in general, calling for a critical examination of previous work in this field. Our findings also have important implications for the performance of Mott materials in next-generation neuromorphic computing technology.
Strain engineering is a well-known method often used to tune material properties in thin films. The most studied sources of strain are lattice mismatch and differential thermal contraction between the substrate and film. However, in materials which undergo a structural phase transition (SPT), a third and often overlooked source of strain may play a very significant role. If the substrate confines the area of the film, the SPT may induce stress which changes the evolution of the transition. This is a 2D analog of the isochoric phase transition between water and ice, where the freezing point drops below 0 °C. To illustrate this, the prototypical Mott insulator V 2 O 3 which has an SPT coupled to a metal-insulator transition is used to show how self-induced strain can drastically alter structural and electronic properties. This effect provides an elegant approach for mapping the phase diagram of the SPT and the transitions coupled to it. Moreover, the magnitude of self-straining is tunable by modifying the substrate morphology. This effect may be important for numerous materials which exhibit an SPT and are subjected to geometrical constraints.
Artículo de publicación ISIWe have used Monte Carlo simulations to investigate the magnetic properties of asymmetric dots as a function of their geometry. The asymmetry of round dots is produced by cutting off a fraction of the dot and is characterized by an asymmetry parameter . This shape asymmetry has interesting effects on the coercivity (Hc), remanence (Mr), and barrier for vortex and C- state formation. The dependences of Hc and Mr are non monotonic as a function of with a well defined minima in these parameters. The vortex enters the most asymmetric part and exits through the symmetric portion of the dot. With increasing the vortex formation starts with a C-state which persists for longer fields and the barrier for vortex exit diminishes with increasing asymmetry, thus providing control over the magnetic chirality. This implies interesting, naively-unexpected, magnetic behavior as a function of geometry and magnetic field
The possibility of a three-state nanoelement, composed by a wire and a tube, is investigated by means of Monte Carlo simulations. The desired behavior may be identified by a step or plateau in the hysteresis curve, corresponding to a partial pinning of the domain wall at the interface between wire and tube sections. This step may be augmented in segmented nanoelements with large coercivity difference between the sections. Different possibilities, such as geometry and choice of materials, are explored.
In a spintronic resonator a radio-frequency signal excites spin dynamics that can be detected by the spin-diode effect. Such resonators are generally based on ferromagnetic metals and their responses to spin torques. New and richer functionalities can potentially be achieved with quantum materials, specifically with transition metal oxides that have phase transitions that can endow a spintronic resonator with hysteresis and memory. Here we present the spin torque ferromagnetic resonance characteristics of a hybrid metal-insulator-transition oxide/ ferromagnetic metal nanoconstriction. Our samples incorporate $${\mathrm {V}}_2{\mathrm {O}}_3$$ V 2 O 3 , with Ni, Permalloy ($${\hbox {Ni}}_{80}{\hbox {Fe}}_{20}$$ Ni 80 Fe 20 ) and Pt layers patterned into a nanoconstriction geometry. The first order phase transition in $${\mathrm {V}}_2{\mathrm {O}}_3$$ V 2 O 3 is shown to lead to systematic changes in the resonance response and hysteretic current control of the ferromagnetic resonance frequency. Further, the output signal can be systematically varied by locally changing the state of the $${\mathrm {V}}_2{\mathrm {O}}_3$$ V 2 O 3 with a dc current. These results demonstrate new spintronic resonator functionalities of interest for neuromorphic computing.
The high-power consumption caused by Joule heating is one reason for the emergence of the research area of neuromorphic computing. However, Joule heating is not only detrimental. In a specific class of devices considered for emulating firing of neurons, the formation of an electro-thermal filament sustained by locally confined Joule heating accompanies resistive switching. Here, the resistive switching in a V2O3-thin-film device is visualized via high-resolution wide-field microscopy. Although the formation and destruction of electro-thermal filaments dominate the resistive switching, the strain-induced coupling of the structural and electronic degrees of freedom leads to various unexpected effects like oblique filaments, filament splitting, memory effect, and a hysteretic current-voltage relation with saw-tooth like jumps at high currents. Main Text:The strongly correlated electron system (SCES) V2O3 is a prototypical Mott-Hubbard insulator [1]. At room temperature, stoichiometric V2O3 is a paramagnetic metal with corundum structure, which undergoes a metal-to-insulator-transition (MIT) in cooling below about 150 K. The insulating phase is antiferromagnetic with monoclinic structure.Upon heating the insulating phase undergoes an insulator-to-metal-transition (IMT) [2][3][4]. In recent years, there has been a growing interest in the resistive switching of SCES-devices [5].
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.