To optimize both production and maintenance, from both a technical and an economical point of view, it would be advisable to predict the future health condition of a system and of its components, starting from field measurements taken in the past. For this purpose, this paper presents a methodology, based on the Monte Carlo statistical method, which aims to determine the future operating state of a gas turbine. The methodology allows the system future availability to be estimated, to support a prognostic process based on past historical data trends. One of the most innovative features is that the prognostic methodology can be applied to both global and local performance parameters, as, for instance, machine specific fuel consumption or local temperatures. First, the theoretical background for developing the prognostic methodology is outlined. Then, the procedure for implementing the methodology is developed and a simulation model is set up. Finally, different degradation-over-time scenarios for a gas turbine are simulated and a sensitivity analysis on methodology response is carried out, to assess the capability and the reliability of the prognostic methodology. The methodology proves robust and reliable, with a prediction error lower than 2%, for the availability associated with the next future data trend
The performance of gas turbines degrades over time and, as a consequence, a decrease in gas turbine performance parameters also occurs, so that they may fall below a given threshold value. Therefore, corrective maintenance actions are required to bring the system back to an acceptable operating condition. In today’s competitive market, the prognosis of the time evolution of system performance is also recommended, in such a manner as to take appropriate action before any serious malfunctioning has occurred and, as a consequence, to improve system reliability and availability. Successful prognostics should be as accurate as possible, because false alarms cause unnecessary maintenance and nonprofitable stops. For these reasons, a prognostic methodology, developed by the authors, is applied in this paper to assess its prediction reliability for several degradation scenarios typical of gas turbine performance deterioration. The methodology makes use of the Monte Carlo statistical method to provide, on the basis of the recordings of past behavior, a prediction of future availability, i.e., the probability that the considered machine or component can be found in the operational state at a given time in the future. The analyses carried out in this paper aim to assess the influence of the degradation scenario on methodology prediction reliability, as a function of a user-defined threshold and minimum value allowed for the parameter under consideration. A technique is also presented and discussed, in order to improve methodology prediction reliability by means a correction factor applied to the time points used for methodology calibration. The results presented in this paper show that, for all the considered degradation scenarios, the prediction error is lower than 4% (in most cases, it is even lower than 2%), if the availability is estimated for the next trend, while it is not higher than 12%, if the availability is estimated five trends ahead. The application of a proper correction factor allows the prediction errors after five trends to be reduced to approximately 5%
The performance of gas turbines degrades over time and, as a consequence, a decrease in gas turbine performance parameters also occurs, so that they may fall below a given threshold value. Therefore, corrective maintenance actions are required to bring the system back to an acceptable operating condition. In today’s competitive market, the prognosis of the time evolution of system performance is also recommended, in such a manner as to take appropriate action before any serious malfunctioning has occurred and, as a consequence, to improve system reliability and availability. Successful prognostics should be as accurate as possible, because false alarms cause unnecessary maintenance and non-profitable stops. For these reasons, a prognostic methodology, developed by the authors, is applied in this paper to assess its prediction reliability for several degradation scenarios typical of gas turbine performance deterioration. The methodology makes use of the Monte Carlo statistical method to provide, on the basis of the recordings of past behavior, a prediction of future availability, i.e. the probability that the considered machine or component can be found in the operational state at a given time in the future. The analyses carried out in this paper aim to assess the influence of the degradation scenario on methodology prediction reliability, as a function of a user-defined threshold and minimum value allowed for the parameter under consideration. A technique is also presented and discussed, in order to improve methodology prediction reliability by means a correction factor applied to the time points used for methodology calibration. The results presented in this paper show that, for all the considered degradation scenarios, the prediction error is lower than 4% (in most cases, it is even lower than 2%), if the availability is estimated for the next trend, while it is not higher than 12%, if the availability is estimated five trends ahead. The application of a proper correction factor allows the prediction errors after five trends to be reduced to approximately 5%.
In the field of system engineering, the main goal is the prediction of the future health condition of a system and of its components, starting from field measurements taken in the past. This is aimed to optimize both production and maintenance, from both a technical and an economical point of view. In this context, this paper presents a methodology, based on the Monte Carlo statistical method, which aims to determine the future operating state of a gas turbine. The methodology allows the system future availability to be estimated, to support a prognostic process based on past historical data trends. One of the most innovative features is that the prognostic methodology can be applied to both global and local performance parameters, as for instance machine specific fuel consumption and local temperatures. First, the theoretical background for developing the prognostic methodology is outlined. Then, the procedure for implementing the methodology is developed and a simulation model is set up. Finally, different degradation-over-time scenarios for a gas turbine are simulated and a sensitivity analysis on methodology response is carried out, to assess the capability and the reliability of the prognostic methodology. The methodology proves robust and reliable, with a prediction error lower than 2%, for the availability associated with the next future data trend.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.